{"product_id":"kit-paramani-barkbusters-yamaha-ttr90-ttr110-bhg-039","title":"Barkbusters BHG-039 handguard mounting kit for Yamaha TT-R90, TT-R110, and TT-R110E mini bikes","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-039\u003c\/strong\u003e is the Barkbusters mounting kit from the \u003cstrong\u003eMini\u003c\/strong\u003e range, designed for the \u003cstrong\u003eYamaha TT-R90, TT-R110 and TT-R110E\u003c\/strong\u003e mini bikes. It is a \u003cstrong\u003etwo-point mounting\u003c\/strong\u003e kit: the aluminium bar anchors to the handlebar end and to a clamp on the straight section, forming a continuous arch around the hand.\u003c\/p\u003e\n\u003cp\u003eThis is not a toy handguard. It is the same heat-treated aluminium structure used on larger bikes, designed for the 22 mm handlebar of the TT-R models. On a bike used by someone who is learning, it makes more sense than anywhere else: learners fall, and when they fall, they put their hands and levers down.\u003c\/p\u003e\n\u003cp\u003eKnow this before ordering: \u003cstrong\u003ethe protective plastics are not included\u003c\/strong\u003e, and this kit is compatible with \u003cstrong\u003etwo series, not four\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003ePay attention to the plastics: only JET and VPS are compatible here\u003c\/h2\u003e\n\u003cp\u003eFor kits for larger bikes, Barkbusters lists four compatible series. For this Mini kit, it lists \u003cstrong\u003etwo: JET and VPS\u003c\/strong\u003e. Some foreign retailers also mention STORM, but the manufacturer's official page does not, and we follow that information. If you are interested in a different series, \u003ca href=\"\/en\/pages\/contatti\"\u003econtact us\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003ch2\u003eMain features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-point mounting:\u003c\/strong\u003e the configuration the manufacturer specifies for \u003cem\u003eimpact protection\u003c\/em\u003e. The single-point configuration is specified only for wind and weather protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-treated aluminium bar\u003c\/strong\u003e, scaled down for mini bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 22 mm handlebars\u003c\/strong\u003e with a straight section, as fitted to the TT-R models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural aluminium finish\u003c\/strong\u003e, code NP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo compatible plastic series:\u003c\/strong\u003e JET and VPS, sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Australia\u003c\/strong\u003e by Rideworx Pty Ltd, which has designed handguards since 1984.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eTT-R90\u003c\/td\u003e\n\u003ctd\u003eall stated model years\u003c\/td\u003e\n\u003ctd\u003eBHG-039-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eTT-R110\u003c\/td\u003e\n\u003ctd\u003eall stated model years\u003c\/td\u003e\n\u003ctd\u003eBHG-039-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eTT-R110E\u003c\/td\u003e\n\u003ctd\u003eall stated model years\u003c\/td\u003e\n\u003ctd\u003eBHG-039-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe manufacturer does not specify a year range for these models. Compatibility applies to the bike in its \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e: if a different handlebar has been fitted, verify the mounting before purchasing.\u003c\/p\u003e\n\u003cp\u003eBarkbusters has other Mini kits for different mini bikes: if you have another model, \u003ca href=\"\/en\/pages\/contatti\"\u003econtact us\u003c\/a\u003e and we will provide the correct code.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminium bar, dedicated clamps and hardware. The manufacturer does not state the weight and dimensions numerically, and we do not estimate them. \u003cstrong\u003eWe will not speculate about handlebar weights:\u003c\/strong\u003e the documentation for this kit does not mention them, and the complete parts list is in the official instructions attached to the product page.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the bike is a TT-R90, TT-R110 or TT-R110E with the original 22 mm handlebar.\u003c\/li\u003e\n\u003cli\u003eClear the handlebar ends of any factory-fitted components.\u003c\/li\u003e\n\u003cli\u003eFit the clamp to the straight section of the handlebar, in front of the controls, without fully tightening it.\u003c\/li\u003e\n\u003cli\u003eAttach the aluminium bar to the handlebar end and the clamp, then position it.\u003c\/li\u003e\n\u003cli\u003eFit the JET or VPS plastics you selected, align them and tighten them to the torque settings specified by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eCheck the throttle, front brake and clutch, and make sure the steering turns freely from lock to lock, then check the tightness again after the first 50 km.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe torque settings and complete sequence are provided in the official INS-BHG-039-NP instructions, attached to this product page and supplied with the kit. \u003cstrong\u003eThe manufacturer considers handguard installation a safety-critical procedure\u003c\/strong\u003e, to be entrusted to a technician if you are not experienced: on a bike ridden by a young rider, this advice is doubly important.\u003c\/p\u003e\n\u003ch2\u003eWhat you will find in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo heat-treated aluminium bars, natural finish\u003c\/li\u003e\n\u003cli\u003eClamps and complete hardware\u003c\/li\u003e\n\u003cli\u003eINS-BHG-039-NP installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe protective plastics\u003c\/strong\u003e, which must be ordered separately: \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e or \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e. For this Mini kit, the STORM, CARBON and EGO series are not listed as compatible.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is a brand of Rideworx Pty Ltd, an Australian company that has produced handguards since 1984 and began in enduro. The Mini range applies the same approach used for larger bikes: a structure designed for the specific bike, with interchangeable plastics selected separately. Riders who grow up with a TT-R protected this way will find the same system on their next bike.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eAt Endurrad, you will find the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters range\u003c\/a\u003e with compatibility verified against the manufacturer's official documentation, code by code — including differences like this one, where the Mini kit accepts two plastic series instead of four. Free shipping in Italy on orders over €100, returns within 14 days, 1-year warranty.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two-point, aluminum","offer_id":56617163981144,"sku":"BR-BHG-039-01-NP","price":98.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/paramani-mini-moto-yamaha.jpg?v=1769678155","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-yamaha-ttr90-ttr110-bhg-039","provider":"Endurrad®","version":"1.0","type":"link"}