{"product_id":"kit-paramani-barkbusters-yamaha-super-tenere-1200-bhg-053","title":"Barkbusters BHG-053 handguard mounting kit for Yamaha XTZ1200E Super Ténéré from 2014","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-053\u003c\/strong\u003e is the Barkbusters mounting frame designed around the handlebar geometry of the \u003cstrong\u003eYamaha XTZ1200E Super Ténéré from 2014 onward\u003c\/strong\u003e. It is a \u003cstrong\u003etwo-point mounting kit\u003c\/strong\u003e: the aluminum bar anchors to the end of the handlebar and to a clamp on the straight section, forming a continuous arch around the hand.\u003c\/p\u003e\n\u003cp\u003eThe Super Ténéré is a large adventure touring bike: it is heavy, and when it goes down there is no way to hold it back. At that moment, the handguard determines whether the day continues or you end up with a broken clutch lever hundreds of kilometers from home. This is the situation in which a two-point aluminum frame is worth what it costs.\u003c\/p\u003e\n\u003cp\u003eKnow this before ordering: \u003cstrong\u003ethe protective plastics are not included\u003c\/strong\u003e, while the \u003cstrong\u003ehandlebar weights are\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eIf you have a Super Ténéré, check the year\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour XTZ1200\u003c\/th\u003e\n\u003cth\u003eBarkbusters code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eup to 2013\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kit-paramani-barkbusters-bmw-f700gs-f800gs-yamaha-super-tenere-bhg-040\"\u003eBHG-040\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efrom 2014 onward\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eBHG-053\u003c\/strong\u003e, this page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe 2014 facelift changed the handlebar, and the change in handlebar means a different code.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-point mounting:\u003c\/strong\u003e the configuration the manufacturer specifies for \u003cem\u003eimpact protection\u003c\/em\u003e. The single-point setup is declared only for wind and weather protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-treated aluminum bar:\u003c\/strong\u003e the treatment increases strength without adding weight to the structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar weights included\u003c\/strong\u003e in the package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNatural aluminum finish\u003c\/strong\u003e, code NP.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour series of compatible plastics:\u003c\/strong\u003e JET, VPS, STORM and CARBON, interchangeable on the same frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Australia\u003c\/strong\u003e by Rideworx Pty Ltd, which has designed handguards since 1984.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eThe wraparound frame protects the brake lever, clutch lever and switchgear: it takes the impact and distributes it through the aluminum instead of leaving it to the lever. The plastics determine the rest, and on a long-distance bike the choice leans toward coverage: \u003cstrong\u003eSTORM\u003c\/strong\u003e are the most extensive and the choice for winter, \u003cstrong\u003eVPS\u003c\/strong\u003e have a deflector adjustable to two positions, \u003cstrong\u003eJET\u003c\/strong\u003e remain compact, and \u003cstrong\u003eCARBON\u003c\/strong\u003e are made of carbon fiber.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum bar, dedicated clamps and hardware, and handlebar weights. The manufacturer does not state weight and dimensions numerically, and we do not estimate them.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eXTZ1200E Super Ténéré\u003c\/td\u003e\n\u003ctd\u003efrom 2014 onward\u003c\/td\u003e\n\u003ctd\u003eBHG-053-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe manufacturer lists the range as \u003cstrong\u003eopen-ended\u003c\/strong\u003e, with no final year, and does not distinguish between trim levels: the ES and Raid Edition versions from those years use the same handlebar. Barkbusters compatibility applies to the motorcycle in its \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e: an aftermarket handlebar changes the diameter and thicknesses, so the mounting must be checked before purchase. \u003ca href=\"\/en\/pages\/contatti\"\u003eWrite to us\u003c\/a\u003e with the year and trim level, and we will check it together.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVerify that you have a 2014-onward XTZ1200E Super Ténéré with the original handlebar.\u003c\/li\u003e\n\u003cli\u003eRemove the stock handlebar weights: the ones supplied in the kit go in their place.\u003c\/li\u003e\n\u003cli\u003eMount the clamp on the straight section of the handlebar, in front of the controls, without fully tightening it.\u003c\/li\u003e\n\u003cli\u003eAttach the aluminum bar to the end of the handlebar and to the clamp, then position it.\u003c\/li\u003e\n\u003cli\u003eFit the plastics you have chosen, align them, and tighten them to the torque specifications indicated by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eCheck the throttle, front brake, clutch and free steering from lock to lock, then check the tightness again after the first 50 km.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe tightening torques and complete installation sequence are provided in the official INS-BHG-053-NP instructions, attached to this product page and supplied with the kit. The manufacturer considers handguard installation a safety-critical task, to be entrusted to a technician if you are not familiar with this type of work.\u003c\/p\u003e\n\u003ch2\u003eWhat you get in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo heat-treated aluminum bars, natural finish\u003c\/li\u003e\n\u003cli\u003eClamps and complete hardware\u003c\/li\u003e\n\u003cli\u003eHandlebar weights\u003c\/li\u003e\n\u003cli\u003eINS-BHG-053-NP installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe protective plastics\u003c\/strong\u003e, which must be ordered separately: \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTORM STM-003\u003c\/a\u003e or \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eCARBON BCF-003\u003c\/a\u003e. EGO plastics are not compatible with this frame.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is a brand of Rideworx Pty Ltd, an Australian company that has been producing handguards since 1984. The range is built around a simple principle: a frame designed for the specific motorcycle, with interchangeable plastics to choose according to how you use the bike. On a motorcycle you keep for ten years, being able to change only the plastics is a tangible advantage.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eEndurrad is a store specializing in adventure, touring and enduro motorcycle accessories: the Super Ténéré is exactly the type of motorcycle we exist for. You will find the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters range\u003c\/a\u003e with compatibility checked against the official documentation, code by code, and the instructions attached to the product page so you can read them before buying. Free shipping in Italy on orders over €100, returns within 14 days, 1-year warranty. Also see all \u003ca href=\"\/en\/collections\/accessori-yamaha\"\u003eYamaha accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two-point, aluminum","offer_id":56617162735960,"sku":"BR-BHG-053-00-NP","price":141.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-montaggio-paramani-yamaha.jpg?v=1769678105","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-yamaha-super-tenere-1200-bhg-053","provider":"Endurrad®","version":"1.0","type":"link"}