{"product_id":"kit-paramani-barkbusters-yamaha-mt-07-bhg-068","title":"Barkbusters BHG-068 handguard mounting kit for Yamaha MT-07 from 2013 to 2020, black structure","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-068\u003c\/strong\u003e is the Barkbusters mounting structure designed for the handlebar geometry of the \u003cstrong\u003eYamaha MT-07 from 2013 to 2020\u003c\/strong\u003e and the \u003cstrong\u003eMT-07 LA from 2014 to 2020\u003c\/strong\u003e. It is a \u003cstrong\u003etwo-point mounting kit\u003c\/strong\u003e: the aluminum bar anchors to the end of the handlebar and to a clamp on the straight section, forming a continuous arch around the hand. The bar is \u003cstrong\u003eblack powder-coated\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eOn a naked bike like the MT-07, handguards are not for protection against branches: they are for protection against tip-overs while parked, contact during maneuvers, and low-speed falls. Ordinary situations that cost you a lever and often the switchgear as well.\u003c\/p\u003e\n\u003ch2\u003eIf you have an MT-07, check the year\u003c\/h2\u003e\n\u003cp\u003eThe MT-07 uses different kits twice because the handlebar changes. This is the first check to make.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eYour MT-07\u003c\/th\u003e\n\u003cth\u003eCorrect code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003efrom 2013 to 2020 (and LA from 2014)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eBHG-068\u003c\/strong\u003e, this page\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efrom 2021 to 2024\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kit-montaggio-paramani-due-punti-di-fissaggio-yamaha-mt-09-sp-tracer-xsr-900-mt-07-74918\"\u003eBHG-094\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003efrom 2025\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/en\/products\/kit-montaggio-paramani-nero-due-punti-di-fissaggio-yamaha-mt-07-2025-93110\"\u003eBHG-129\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eMain features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-point mounting:\u003c\/strong\u003e the configuration specified by the manufacturer for \u003cem\u003eimpact protection\u003c\/em\u003e. The single-point setup is declared only for wind and weather protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-treated aluminum bar\u003c\/strong\u003e, part number BAR-BV-040, two pieces, right and left.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack powder-coated finish\u003c\/strong\u003e: the NP suffix in the code does not indicate the finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecified torque settings:\u003c\/strong\u003e 10 Nm for the M6 hardware, 28 Nm for the M8.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour compatible plastic protector sets:\u003c\/strong\u003e JET, VPS, STORM, and CARBON, interchangeable on the same structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Australia\u003c\/strong\u003e by Rideworx Pty Ltd, which has designed handguards since 1984.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eThe wraparound structure protects the brake lever, clutch lever, and switchgear: it withstands the impact and distributes it through the aluminum instead of leaving it to the lever. The plastic protectors determine the rest: \u003cstrong\u003eJET\u003c\/strong\u003e stays compact, \u003cstrong\u003eVPS\u003c\/strong\u003e has a deflector adjustable to two positions, \u003cstrong\u003eSTORM\u003c\/strong\u003e provides more coverage and is the choice for riders who use the bike in winter too, while \u003cstrong\u003eCARBON\u003c\/strong\u003e is made from carbon fiber.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated, black powder-coated aluminum bar, dedicated clamps, connectors, and hardware. The manufacturer does not provide weight and dimensions numerically, and we do not estimate them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe are not making any claims about the handlebar weights.\u003c\/strong\u003e The parts list in the official INS-BHG-068-00-NP instructions lists bars, clamps, connectors, and hardware, but does not mention handlebar weights; some international retailers state that they are included. We are asking the distributor for confirmation and will update this product page: if this is decisive for you, \u003ca href=\"\/en\/pages\/contatti\"\u003econtact us\u003c\/a\u003e before ordering.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eCode\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eMT-07\u003c\/td\u003e\n\u003ctd\u003e2013-2020\u003c\/td\u003e\n\u003ctd\u003eBHG-068-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYamaha\u003c\/td\u003e\n\u003ctd\u003eMT-07 LA\u003c\/td\u003e\n\u003ctd\u003e2014-2020\u003c\/td\u003e\n\u003ctd\u003eBHG-068-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBarkbusters compatibility applies to the motorcycle in its \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e. With an aftermarket handlebar, diameters and thicknesses change, so the mounting must be checked before purchase.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThe manufacturer expressly requires installation to be carried out by a qualified technician\u003c\/strong\u003e, as stated in the instructions for this code. This is not generic wording: on a bike without a fairing, with cables running close to the controls, steering clearance must be checked carefully.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMake sure you have an MT-07 from 2013 to 2020 with the original handlebar.\u003c\/li\u003e\n\u003cli\u003eClear the handlebar ends of anything fitted as standard.\u003c\/li\u003e\n\u003cli\u003eFit the clamp onto the straight section of the handlebar, in front of the controls, without fully tightening it.\u003c\/li\u003e\n\u003cli\u003eAttach the aluminum bar to the handlebar end and to the clamp connector, then position it. The manufacturer recommends positioning the bar horizontally when viewed from the side.\u003c\/li\u003e\n\u003cli\u003eIf you have chosen the plastic protectors, install them, align everything, and tighten: \u003cstrong\u003e10 Nm on the M6, 28 Nm on the M8\u003c\/strong\u003e, using medium-strength threadlocker.\u003c\/li\u003e\n\u003cli\u003eCheck the throttle, front brake, clutch, and engine stop switch, and make sure the steering turns freely from lock to lock. \u003cstrong\u003eRecheck the tightening after the first 50 km.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhat you will find in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo heat-treated aluminum bars, black powder-coated (BAR-BV-040, right and left)\u003c\/li\u003e\n\u003cli\u003eRight and left clamps and connectors\u003c\/li\u003e\n\u003cli\u003eComplete hardware: M6 and M8 bolts, self-locking nuts\u003c\/li\u003e\n\u003cli\u003eINS-BHG-068-00-NP installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlastic protectors\u003c\/strong\u003e, which must be ordered separately: \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e, \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTORM STM-003\u003c\/a\u003e, or \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eCARBON BCF-003\u003c\/a\u003e. EGO plastic protectors are not compatible with this structure. \u003cstrong\u003eHandlebar weights\u003c\/strong\u003e do not appear in the official parts list.\u003c\/p\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is a Rideworx Pty Ltd brand, an Australian company that has been producing handguards since 1984. Born in enduro, it has applied the same approach to road bikes: a structure designed for the specific motorcycle, interchangeable plastic protectors chosen separately, and every component with its own replacement part number. You make the major investment once.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eAt Endurrad, you will find the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters range\u003c\/a\u003e with compatibility checked against the manufacturer's official documentation, part by part, and anything the manufacturer does not declare is written as such instead of being presented as fact. Free shipping in Italy on orders over €100, returns within 14 days, 1-year warranty. Also see all \u003ca href=\"\/en\/collections\/accessori-yamaha\"\u003eYamaha accessories\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two-point, black","offer_id":56617196814680,"sku":"BR-BHG-068-00-NP","price":141.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-montaggio-paramani-due-punti-di-fissaggio-yamaha-mt-07-13-la-14-verniciato-nero.jpg?v=1769678957","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-yamaha-mt-07-bhg-068","provider":"Endurrad®","version":"1.0","type":"link"}