{"product_id":"kit-paramani-barkbusters-triumph-tiger-1200-explorer-gt-bhg-102","title":"Barkbusters BHG-102 handguard mounting kit for Triumph Tiger 1200 Explorer from 2022 and GT, GT Pro, Rally Pro from 2023","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-102\u003c\/strong\u003e is the Barkbusters mounting kit designed for the handlebars of the \u003cstrong\u003eTriumph Tiger 1200 GT Explorer and Rally Explorer from 2022\u003c\/strong\u003e and the \u003cstrong\u003eTiger 1200 GT, GT Pro and Rally Pro from 2023\u003c\/strong\u003e. It is the framework onto which Barkbusters plastics are mounted: on its own, it protects levers and hands from impacts; with the plastics, it also provides shelter from wind, cold and branches.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated aluminum bars, one right and one left.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-point\u003c\/strong\u003e mounting: at the handlebar end and on a split clamp that replaces the original handguard bracket.\u003c\/li\u003e\n\u003cli\u003eAccepts the JET-003, VPS-003, STM-003 and BCF-003 plastics, sold separately.\u003c\/li\u003e\n\u003cli\u003eEnd inserts included.\u003c\/li\u003e\n\u003cli\u003eOfficial instructions with illustrated parts list, torque specifications and notes on the original bracket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eBarkbusters clearly distinguishes between the two mounting configurations, and the \u003cem\u003etwo-point\u003c\/em\u003e setup, anchored both at the end and at the center of the handlebar, is the one the manufacturer specifies for impact protection. On the Tiger 1200 Explorer models, designed for long trips including on unpaved roads, this means keeping the brake and clutch levers protected from falls, stones and branches.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum bars (manufacturer code BAR-V-056), CS-01 split clamps with CP4 connector. The manufacturer does not state the finish or the kit weight, so we do not report them.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eBarkbusters code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriumph\u003c\/td\u003e\n\u003ctd\u003eTiger 1200 GT Explorer\u003c\/td\u003e\n\u003ctd\u003efrom 2022\u003c\/td\u003e\n\u003ctd\u003eBHG-102-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriumph\u003c\/td\u003e\n\u003ctd\u003eTiger 1200 Rally Explorer\u003c\/td\u003e\n\u003ctd\u003efrom 2022\u003c\/td\u003e\n\u003ctd\u003eBHG-102-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriumph\u003c\/td\u003e\n\u003ctd\u003eTiger 1200 GT\u003c\/td\u003e\n\u003ctd\u003efrom 2023\u003c\/td\u003e\n\u003ctd\u003eBHG-102-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriumph\u003c\/td\u003e\n\u003ctd\u003eTiger 1200 GT Pro\u003c\/td\u003e\n\u003ctd\u003efrom 2023\u003c\/td\u003e\n\u003ctd\u003eBHG-102-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTriumph\u003c\/td\u003e\n\u003ctd\u003eTiger 1200 Rally Pro\u003c\/td\u003e\n\u003ctd\u003efrom 2023\u003c\/td\u003e\n\u003ctd\u003eBHG-102-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eHave another Tiger 1200?\u003c\/strong\u003e Each generation has its own code:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGT, GT Pro and Rally Pro from 2022: \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-triumph-tiger-1200-2022-bhg-101\"\u003eBHG-101\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTiger 1200 Explorer from 2018: \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-triumph-tiger-1200-explorer-bhg-071\"\u003eBHG-071\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTiger 1200 Explorer up to 2017: \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-triumph-tiger-800-tiger-1200-explorer-bhg-059\"\u003eBHG-059\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe manufacturer specifies that fitment tests are carried out on standard motorcycles, with the original handlebar and windshield in the factory position. With aftermarket or repositioned components, fitment must be verified before purchase.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eRemove the original handguards and, if present, the stock bar-end weights. The \u003cstrong\u003eoriginal handguard bracket mounted under the mirror\u003c\/strong\u003e must also be removed: the space it leaves is filled with the kit spacers. Removing it exposes wiring on the clutch side, which the manufacturer says can be removed for aesthetic reasons. Then install the clamp without tightening it, observing the orientation of the machined rings, attach the bar to the end and connector, and position it horizontally when viewed from the side. Tighten in the specified order: end bolt, bar bolt, then the two clamp bolts. Specified torques: \u003cstrong\u003e10 Nm for the M6 bolts and 28 Nm for the M8 bolts\u003c\/strong\u003e, using medium-strength threadlocker and checking tightness after the first 50 km.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd threading:\u003c\/strong\u003e the kit mounts in the 6 mm handlebar hole using the included M6 bolts. For greater holding strength, the manufacturer recommends enlarging it to 8 mm; the M8 bolts are not included in that case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrottle:\u003c\/strong\u003e leave approximately 3 mm of clearance between the throttle grip and the handguard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBarkbusters recommends installation by a workshop.\u003c\/p\u003e\n\u003ch2\u003eWhat you will find in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 aluminum bars, one right and one left\u003c\/li\u003e\n\u003cli\u003e2 pairs of split shells and 2 connectors for the clamps\u003c\/li\u003e\n\u003cli\u003e2 spacers for the original bracket space\u003c\/li\u003e\n\u003cli\u003e2 bar-end inserts (code BEW35) and 4 M6 washers\u003c\/li\u003e\n\u003cli\u003eHardware: 2 M6x35 countersunk-head bolts, 2 M8x25 button-head bolts, 2 M6x30 bolts, 2 M6x25 bolts and 4 M6 self-locking nuts\u003c\/li\u003e\n\u003cli\u003eOfficial INS-BHG-102 instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective plastics.\u003c\/strong\u003e The kit is the framework only: the plastics must be purchased separately from those specified by the manufacturer for this code.\u003c\/li\u003e\n\u003cli\u003eThe M8 bolts for those who choose to enlarge the threading, threadlocker and tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlastics to pair with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e: compact profile, for enduro and mixed use.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-003\"\u003eVPS-003\u003c\/a\u003e: adjustable deflector with two positions, for adventure and touring. It is being discontinued, and the price list indicates the \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e as its replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTM-003\u003c\/a\u003e, STORM series: more extensive coverage, for road use and colder months.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eBCF-003\u003c\/a\u003e, CARBON series: made of carbon fiber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is an Australian brand owned by Rideworx Pty Ltd, specializing in motorcycle handguards. Each specific kit is designed around the geometry of a particular handlebar, with a published parts list and an installation PDF specifying the hardware, sequence and torque settings. The framework and plastics remain separate: you can change the plastics series or color without replacing the kit.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eOn Endurrad, every Barkbusters product page states the exact code, the years covered and what is actually in the box, with the official instructions available for download before purchase. You can find the complete range in the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two attachment points","offer_id":56617287254360,"sku":"BR-BHG-102-00-NP","price":121.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-paramani-barkbusters-triumph-tiger-1200-explorer-bhg-102-01.jpg?v=1790167844","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-triumph-tiger-1200-explorer-gt-bhg-102","provider":"Endurrad®","version":"1.0","type":"link"}