{"product_id":"kit-paramani-barkbusters-royal-enfield-himalayan-2023-bhg-111","title":"Barkbusters BHG-111 handguard mounting kit for Royal Enfield Himalayan from 2023","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-111\u003c\/strong\u003e is the Barkbusters mounting kit that the manufacturer lists for the \u003cstrong\u003eRoyal Enfield Himalayan from 2023\u003c\/strong\u003e. It is the structure onto which Barkbusters plastics are mounted: on its own, it protects levers and hands from impacts; with the plastics, it also provides protection from wind, cold and branches.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich Himalayan?\u003c\/strong\u003e Barkbusters writes “Himalayan from 2023” without specifying the engine displacement. For the \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-royal-enfield-himalayan-450-guerrilla-450-bhg-119\"\u003eHimalayan 450 from 2024\u003c\/a\u003e, it lists the BHG-119; for the \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-ktm-390-adventure-himalayan-xt660r-bhg-084\"\u003eHimalayan from 2016 to 2021\u003c\/a\u003e, the BHG-084. \u003cstrong\u003eBefore ordering, tell us your motorcycle's model and year\u003c\/strong\u003e: we will verify it with the distributor.\u003c\/p\u003e\n\u003ch2\u003eMain features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated aluminum bars, right and left.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-point\u003c\/strong\u003e mounting: at the handlebar end and on a frame clamp tightened around the tube.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHandlebar weights included\u003c\/strong\u003e: two Barkbusters BEW35.\u003c\/li\u003e\n\u003cli\u003eCompatible with JET-003, VPS-003, STM-003 and BCF-003 plastics, sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eBarkbusters clearly distinguishes between the two mounting configurations, and the \u003cem\u003etwo-point\u003c\/em\u003e configuration, anchored both at the end and at the center of the handlebar, is the one the manufacturer specifies for impact protection. On the Himalayan, designed for gravel roads and long journeys, this means keeping the levers protected from falls, stones and branches.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum bars (manufacturer code BAR-V058), CFS-ADV-23 frame clamps. The manufacturer does not state the kit's finish or weight, so we do not list them.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eBarkbusters code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoyal Enfield\u003c\/td\u003e\n\u003ctd\u003eHimalayan *\u003c\/td\u003e\n\u003ctd\u003efrom 2023\u003c\/td\u003e\n\u003ctd\u003eBHG-111-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e* Engine displacement not specified by the manufacturer. Barkbusters states compatibility for motorcycles in \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eRemove the original handlebar weights. Mount the clamp without tightening it, preassemble the bolt, bar, weight and washers, and position them at the handlebar end, aligning the clamp with the end of the bar. Screw in the end bolt without tightening it, then insert the bolt that passes through the bar and spacer and fastens into the clamp. With the bar preferably horizontal when viewed from the side, tighten in this order: end bolt, bar bolt, then the clamp bolts evenly.\u003c\/p\u003e\n\u003cp\u003eSpecified torque settings: \u003cstrong\u003e10 Nm for the M6 bolts and 28 Nm for the M8 bolts\u003c\/strong\u003e, using medium-strength threadlocker and checking again after the first 50 km. Once installation is complete, check the controls and the mirror view, which must not be obstructed. Barkbusters recommends professional installation.\u003c\/p\u003e\n\u003ch2\u003eWhat you will find in the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 aluminum bars, right and left\u003c\/li\u003e\n\u003cli\u003e2 frame clamps with half-shells, right and left\u003c\/li\u003e\n\u003cli\u003e2 BEW35 handlebar weights, 4 M8 washers, 2 7 mm spacers\u003c\/li\u003e\n\u003cli\u003eHardware: 2 M8x45 bolts and 2 M8x30 countersunk bolts, 2 M6x30 bolts and 2 M6x20 button-head bolts\u003c\/li\u003e\n\u003cli\u003eOfficial INS-BHG-111 instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eProtection plastics.\u003c\/strong\u003e The kit is the structure only: the plastics must be purchased separately from those listed by the manufacturer.\u003c\/li\u003e\n\u003cli\u003eThreadlocker and tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlastics to pair with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e: compact profile, for off-road and mixed use.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-003\"\u003eVPS-003\u003c\/a\u003e: two-position adjustable deflector, for touring. It is being phased out, and the price list indicates the \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e as its replacement.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTM-003\u003c\/a\u003e, STORM series: more extensive coverage, for the colder months.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eBCF-003\u003c\/a\u003e, CARBON series: made of carbon fiber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is an Australian brand owned by Rideworx Pty Ltd, specializing in motorcycle handguards. Each specific kit is designed around the geometry of a particular handlebar, with a published parts list and an installation PDF specifying the hardware, sequence and torque settings. The structure and plastics remain separate: you can change the plastics series or color without replacing the kit.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eOn Endurrad, every Barkbusters product page states the exact code, what has and has not been verified, and what is actually in the box, with the official instructions available to download before purchase. You can find the entire range in the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two attachment points","offer_id":56617162703192,"sku":"BR-BHG-111-00-NP","price":121.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-paramani-barkbusters-royal-enfield-himalayan-2023-bhg-111-01.jpg?v=1790171609","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-royal-enfield-himalayan-2023-bhg-111","provider":"Endurrad®","version":"1.0","type":"link"}