{"product_id":"kit-paramani-barkbusters-honda-crf300l-bhg-091","title":"Barkbusters BHG-091 handguard mounting kit for Honda CRF300L from 2021","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-091\u003c\/strong\u003e is the Barkbusters mounting kit designed around the handlebar geometry of the \u003cstrong\u003eHonda CRF300L from 2021 onward\u003c\/strong\u003e. It is the aluminum structure that supports the handguards: it protects your hands, levers, and controls from branches, gravel, and falls, and stays on the bike even when you change the plastics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCRF300L only, not CRF300 Rally.\u003c\/strong\u003e The two bikes share the engine and chassis, but not the handlebar or the space around the controls: for the Rally, the manufacturer specifies a different code, BHG-093. It is the most common mistake with this bike, so it is worth checking before ordering.\u003c\/p\u003e\n\u003cp\u003eAs with the entire range, \u003cstrong\u003ethe structure and protective plastics are two separate products\u003c\/strong\u003e: here you are purchasing the structure only, with the hardware.\u003c\/p\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-point mounting\u003c\/strong\u003e — anchoring at the handlebar end plus a clamp on the straight section. This is the configuration the manufacturer specifies for impact protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-treated aluminum bar\u003c\/strong\u003e, with a wraparound design and natural aluminum finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecific to the CRF300L\u003c\/strong\u003e, with the Rally excluded from the manufacturer's declaration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchangeable plastics\u003c\/strong\u003e — compatible with JET, VPS, STORM, and CARBON, each sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in Australia\u003c\/strong\u003e by Rideworx Pty Ltd.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eThe CRF300L is a lightweight road-legal enduro, and people who buy it use it: gravel roads, trails, and the falls that are part of off-road riding. The stock handguards are plastic and have no internal structure: they protect against wind and thin branches, but in a fall they bend together with the lever. The two-point mounting does a different job: the aluminum bar forms a cage around the hand and transfers the impact to the structure. On a bike used where the road ends, it is the difference between getting back up and continuing and getting back up and going home. The \u003cem\u003esingle-point\u003c\/em\u003e configuration, the other setup in the range, is specified by the manufacturer only for protection from wind and weather.\u003c\/p\u003e\n\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum structure, a process the manufacturer uses to increase strength and impact-absorption capacity. The design is wraparound: it starts at the straight section of the handlebar, curves around the hand, and closes at the end. The clamp is shaped to fit between the cables and lines of the CRF300L.\u003c\/p\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eBarkbusters code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCRF300L\u003c\/td\u003e\n\u003ctd\u003efrom 2021 onward\u003c\/td\u003e\n\u003ctd\u003eBHG-091-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eCompatibility declared by Barkbusters for motorcycles in \u003cstrong\u003eoriginal factory configuration\u003c\/strong\u003e. Aftermarket handlebars have different diameters and wall thicknesses: mounting must be checked before purchase. Unsure about your model? \u003ca href=\"\/en\/pages\/contatti\"\u003eContact us\u003c\/a\u003e with the model and year.\u003c\/small\u003e\u003c\/p\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eInstalls on the original handlebar, with no drilling or modifications to the motorcycle. The stock plastic handguards must be removed, and the handlebar end must be cleared as described in the official instructions.\u003c\/p\u003e\n\u003cp\u003eBefore fully tightening, check that the throttle, front brake, clutch, and engine-stop switch operate freely and that the steering turns from lock to lock without interference. Recheck the tightening after the first \u003cstrong\u003e50 km\u003c\/strong\u003e, and after every fall. The complete sequence and warnings are in the official instructions \u003cstrong\u003eINS-BHG-091-NP\u003c\/strong\u003e, attached to this listing in the Manufacturer documents section.\u003c\/p\u003e\n\n\u003ch2\u003eWhat you will find in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTwo heat-treated aluminum bars\u003c\/li\u003e\n\u003cli\u003eClamps for the straight section of the handlebar\u003c\/li\u003e\n\u003cli\u003eComplete mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective plastics.\u003c\/strong\u003e They must be selected and ordered separately from the \u003ca href=\"\/en\/collections\/barkbusters-plastiche\"\u003eJET, VPS, STORM, and CARBON\u003c\/a\u003e ranges. EGO plastics are not compatible with this structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar bar-end weights.\u003c\/strong\u003e For this code, the manufacturer does not list them among the kit contents, unlike other codes in the range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is a Rideworx Pty Ltd brand, an Australian company that has designed and manufactured motorcycle handguards since 1984. The range is built around a clear idea: the structure is specific to the motorcycle, while the plastics are universal within the system. Buy the correct structure once, then choose the protection you need, replace it if it is damaged in a fall or if your type of riding changes, without replacing everything.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eEndurrad stocks accessories for touring, adventure, and enduro motorcycles: compatibility checked against the manufacturer's documentation, official instructions attached to the listing, and assistance before purchase if your model is unclear. Free shipping in Italy above €100 and in Europe above €250, 14-day returns, 1-year warranty. See the entire \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters range\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two-point, aluminum","offer_id":56617199993176,"sku":"BR-BHG-091-00-NP","price":124.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-paramani-barkbusters-bhg-091-honda-crf300l-01_0b2cf1b6-80ff-4e8e-8671-a7f9f646bff1.jpg?v=1789575285","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-honda-crf300l-bhg-091","provider":"Endurrad®","version":"1.0","type":"link"}