{"product_id":"kit-paramani-barkbusters-cfmoto-700mt-bhg-144","title":"Barkbusters BHG-144 handguard mounting kit for CFMoto 700MT","description":"\u003cp\u003eThe \u003cstrong\u003eBHG-144\u003c\/strong\u003e is the Barkbusters mounting kit designed for the handlebars of the \u003cstrong\u003eCFMoto 700MT\u003c\/strong\u003e. It is the structure onto which Barkbusters plastics are mounted: on its own, it protects levers and hands from impacts; with the plastics, it also provides protection from wind, cold, and branches.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated aluminum bars, one right and one left.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-point mounting\u003c\/strong\u003e: inside the handlebar end and on a split clamp tightened around the tube.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar weights included\u003c\/strong\u003e: two Barkbusters BEW35.\u003c\/li\u003e\n\u003cli\u003eCompatible with JET-003, VPS-003, STM-003, and BCF-003 plastics, sold separately.\u003c\/li\u003e\n\u003cli\u003eOfficial instructions with illustrated parts list and tightening torques.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection and use\u003c\/h2\u003e\n\u003cp\u003eBarkbusters clearly distinguishes between the two mounting configurations, and the \u003cem\u003etwo-point\u003c\/em\u003e setup, anchored both at the end and at the center of the handlebar, is the one the manufacturer specifies for impact protection. On the 700MT, a touring crossover, this means protecting the brake and clutch levers from stationary falls, stones, and branches.\u003c\/p\u003e\n\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\n\u003cp\u003eHeat-treated aluminum bars (manufacturer code BAR-V-069), CS-STD split clamps with a different connector for each side (CP4 and CP5). The manufacturer does not state the kit's finish or weight, so we do not report them.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eBarkbusters code\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFMoto\u003c\/td\u003e\n\u003ctd\u003e700MT\u003c\/td\u003e\n\u003ctd\u003efrom 2026 *\u003c\/td\u003e\n\u003ctd\u003eBHG-144-NP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e* The manufacturer's catalog lists the 700MT from 2026, while the fitting instructions start from 2025. \u003cstrong\u003eIf your motorcycle is a 2025 model, contact us before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have a CFMoto 800MT or 450MT?\u003c\/strong\u003e For these models, Barkbusters specifies the \u003ca href=\"\/en\/products\/kit-paramani-barkbusters-ducati-multistrada-v4-cfmoto-800mt-bhg-089-alluminio\"\u003eBHG-089\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer specifies that fitment tests are carried out on standard motorcycles, with the original handlebar and windscreen in the factory position. With aftermarket or repositioned components, fitment must be checked before purchase.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eRemove the original handguards and, if present, the stock handlebar weights. The handlebar must be in the \u003cstrong\u003estandard position\u003c\/strong\u003e, with the long reference line aligned with the steering plate. Fit the clamp and connector without tightening them, secure the bar at the end and to the connector, and position it horizontally when viewed from the side. Tighten in the order specified by the manufacturer. Specified torques: \u003cstrong\u003e10 Nm for the M6 bolts and 28 Nm for the M8 bolts\u003c\/strong\u003e, using medium-strength threadlocker and checking the tightening after the first 50 km. Leave approximately 3 mm of clearance between the throttle grip and the handguard. Barkbusters recommends professional installation.\u003c\/p\u003e\n\u003ch2\u003eWhat you will find in the package\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 aluminum bars, one right and one left\u003c\/li\u003e\n\u003cli\u003e2 pairs of split clamps and 2 connectors, one for each side\u003c\/li\u003e\n\u003cli\u003e2 BEW35 handlebar weights, 2 expanders, 2 wing nuts, 2 7 mm spacers\u003c\/li\u003e\n\u003cli\u003eHardware: 2 M8x60 countersunk screws, 2 M8x25 button-head screws, 2 M6x30 screws, 2 M6x25 screws, and 4 M6 self-locking nuts\u003c\/li\u003e\n\u003cli\u003eOfficial INS-BHG-144 instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is NOT included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective plastics.\u003c\/strong\u003e The kit consists of the structure only: the plastics must be purchased separately from those specified by the manufacturer for this code.\u003c\/li\u003e\n\u003cli\u003eThreadlocker and tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlastics to pair with it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-jet-003\"\u003eJET-003\u003c\/a\u003e: compact profile, for enduro and mixed use.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-003\"\u003eVPS-003\u003c\/a\u003e: two-position adjustable deflector, for adventure and touring. It is being phased out, and the price list indicates the \u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-vps-203\"\u003eVPS-203\u003c\/a\u003e as its replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-storm-stm-003\"\u003eSTM-003\u003c\/a\u003e, STORM series: more extensive coverage, for road use and colder months.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en\/products\/plastiche-paramani-barkbusters-carbon-bcf-003\"\u003eBCF-003\u003c\/a\u003e, CARBON series: made of carbon fiber.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy choose Barkbusters\u003c\/h2\u003e\n\u003cp\u003eBarkbusters is an Australian brand owned by Rideworx Pty Ltd, specializing in motorcycle handguards. Each specific kit is designed around the geometry of a particular handlebar, with a published parts list and a fitting PDF specifying the hardware, sequence, and torques. The structure and plastics remain separate: you can change the plastic series or color without changing the kit.\u003c\/p\u003e\n\u003ch2\u003eWhy buy it from Endurrad\u003c\/h2\u003e\n\u003cp\u003eOn Endurrad, every Barkbusters product page specifies the exact code, the years covered, and what is actually included in the box, with the official instructions available to download before purchase. You can find the complete range in the \u003ca href=\"\/en\/collections\/barkbusters\"\u003eBarkbusters collection\u003c\/a\u003e.\u003c\/p\u003e","brand":"BARKBUSTERS","offers":[{"title":"Two attachment points","offer_id":56617440018776,"sku":"BR-BHG-144-00-NP","price":111.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/kit-paramani-barkbusters-cfmoto-700mt-bhg-144-01.jpg?v=1790168300","url":"https:\/\/endurrad.com\/en\/products\/kit-paramani-barkbusters-cfmoto-700mt-bhg-144","provider":"Endurrad®","version":"1.0","type":"link"}