{"product_id":"frecce-moto-sgancio-rapido-kit-4-clicknride-cnr-4204","title":"Approved LED Quick-Release Motorcycle Turn Signals, 4-Piece Kit – Front","description":"\u003cp\u003eComplete set of quick-release LED turn signals for the front and rear, for enduro, off-road or track riding: before a technical section, remove them with one click in just a few seconds and without tools, then put them back on to return to the road legally. Branches, falls and transport on a trailer will no longer break them.\u003c\/p\u003e\u003ch2\u003eWill it fit my motorcycle?\u003c\/h2\u003e\u003cp\u003eThe mounting is universal. The socket fits into a 10 mm hole in a number plate holder, number plate bracket or mounting bracket, with enough plastic or metal around it for the fastening nut (23 mm in diameter). It therefore fits almost all enduro, dual-sport and adventure motorcycles: KTM, Husqvarna, GasGas, Yamaha, Honda, Kawasaki, Suzuki, SWM and others.\u003c\/p\u003e\u003cp\u003eIf your motorcycle was originally equipped with bulb turn signals, you will also need LED turn signal resistors, sold separately: without them, the turn signals will flash too quickly or will not flash.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 left and 2 right quick-release turn signals\u003c\/li\u003e\n\u003cli\u003e4 sockets to mount on the motorcycle, with wiring and a rubber cover to protect against water and mud\u003c\/li\u003e\n\u003cli\u003e1 mm and 2 mm nylon spacers for adjusting the thickness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e Prima\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e high-intensity SMD LED, 3D optical lens with glossy and satin surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e injection-moulded plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e universal M10 with anti-rotation nut, 10 mm hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e E-mark, UNECE Regulation 50, No. 50R-0313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer's warranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to install them\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eDisconnect the battery and remove the original turn signals.\u003c\/li\u003e\n\u003cli\u003eInsert the socket into the hole with the washer and spacers: the bottom of the nut notch must remain flush with the thread. If too little thread protrudes, thin the plastic from the inside.\u003c\/li\u003e\n\u003cli\u003ePosition the notch horizontally, engage the turn signal to align everything and tighten by hand from behind, using a drop of medium-strength threadlocker.\u003c\/li\u003e\n\u003cli\u003eConnect the red wire to positive and the black wire to ground. If the turn signal does not light up, reverse the two wires: LEDs are polarity-sensitive.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eWe recommend having them installed by a workshop.\u003c\/p\u003e\u003ch2\u003eUse and maintenance\u003c\/h2\u003e\u003cp\u003eClean the turn signal before engaging it. When you remove it and when you wash the motorcycle, close the socket with the dust cap.\u003c\/p\u003e","brand":"CLICKnRIDE","offers":[{"title":"Quick-release LED turn signals (4-piece kit) PRIMA model","offer_id":56617168404824,"sku":"CNR-4204","price":150.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/frecce-moto-attacco-sgancio-rapido-quattro-pezzi.jpg?v=1769678287","url":"https:\/\/endurrad.com\/en\/products\/frecce-moto-sgancio-rapido-kit-4-clicknride-cnr-4204","provider":"Endurrad®","version":"1.0","type":"link"}