{"product_id":"frecce-moto-sgancio-rapido-kit-2-clicknride-cnr-4202","title":"Approved LED Quick-Release Motorcycle Turn Signals, 2-Piece Kit – Front","description":"\u003cp\u003eQuick-release LED indicators for enduro, off-road, or track riding: before a technical section, remove them with one click in just a few seconds and without tools, then reinstall them to return to the road legally. Branches, falls, and transport on a trailer will no longer break them.\u003c\/p\u003e\u003ch2\u003eWill they fit my motorcycle?\u003c\/h2\u003e\u003cp\u003eThe mounting system is universal. The connector fits into a 10 mm hole in a fairing, license plate holder, or bracket, with enough plastic or metal around it for the fastening nut (23 mm in diameter). They therefore fit almost all enduro, dual-sport, and adventure motorcycles: KTM, Husqvarna, GasGas, Yamaha, Honda, Kawasaki, Suzuki, SWM, and others.\u003c\/p\u003e\u003cp\u003eIf your motorcycle was originally equipped with bulb indicators, you also need LED indicator resistors, sold separately: without them, the indicators flash too quickly or do not flash at all.\u003c\/p\u003e\u003ch2\u003eWhat you receive\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 quick-release left indicator and 1 quick-release right indicator\u003c\/li\u003e\n\u003cli\u003e2 connectors to attach to the motorcycle, with wiring and a rubber boot to protect against water and mud\u003c\/li\u003e\n\u003cli\u003e1 mm and 2 mm nylon spacers to adjust the thickness\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFeatures\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e Prima\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight:\u003c\/strong\u003e high-intensity SMD LED, 3D optical lens with glossy and satin surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e injection-molded plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e universal M10 with anti-rotation nut, 10 mm hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e E-mark, UNECE Regulation 50, no. 50R-0313\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer's warranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to install them\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eDisconnect the battery and remove the original indicators.\u003c\/li\u003e\n\u003cli\u003eInsert the connector into the hole with the washer and spacers: the bottom of the nut notch must remain flush with the thread. If too little of the thread protrudes, thin the plastic from the inside.\u003c\/li\u003e\n\u003cli\u003ePosition the notch horizontally, engage the indicator to align everything, and tighten by hand from behind, using a drop of medium-strength threadlocker.\u003c\/li\u003e\n\u003cli\u003eConnect the red wire to positive and the black wire to ground. If the indicator does not light up, swap the two wires: LEDs are polarity-sensitive.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eWe recommend having them installed by a workshop.\u003c\/p\u003e\u003ch2\u003eUse and maintenance\u003c\/h2\u003e\u003cp\u003eClean the indicator before connecting it. When you remove it and when you wash the motorcycle, close the connector with the dust cap.\u003c\/p\u003e","brand":"CLICKnRIDE","offers":[{"title":"Quick-release LED turn signals (2-piece kit) PRIMA model","offer_id":56617168306520,"sku":"CNR-4202","price":81.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/frecce-moto-attacco-sgancio-rapido-due-pezzi.jpg?v=1769678282","url":"https:\/\/endurrad.com\/en\/products\/frecce-moto-sgancio-rapido-kit-2-clicknride-cnr-4202","provider":"Endurrad®","version":"1.0","type":"link"}