{"title":"Motorcycle navigation and electronics","description":"\u003cp\u003eGPS navigators and CarPlay displays, GPS mounts, anti-vibration phone holders, and intercoms for enduro, adventure, and touring motorcycles.\u003c\/p\u003e","products":[{"product_id":"supporto-smartphone-moto-loboo-ph02","title":"Anti-vibration motorcycle smartphone mount, with or without wireless charging","description":"\u003cp\u003eThe LOBOO PH02S is the smartphone mount — or phone holder, if you prefer to call it that — for anyone who travels with navigation running for hours. It holds the device securely with a mechanical claw lock and places three layers of silicone pads between the handlebar and the smartphone. It is available in six configurations: three mounting types, each with or without a charging module.\u003c\/p\u003e\n\n\u003ch2\u003eWith or without a charging module\u003c\/h2\u003e\n\u003cp\u003eThe first choice concerns power, and affects both the price and the installation work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith charging\u003c\/strong\u003e — induction pad up to 15 W and Type-C port with fast PD charging up to 24 W. It must be connected to the motorcycle's 12–16 V electrical system, preferably to a switched positive supply. This is the version for anyone who navigates with their smartphone and does not make it to the end of the day with battery remaining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWithout charging\u003c\/strong\u003e — same structure, same damping, same snap-lock mechanism, but no electronics. Install it and use it without touching the electrical system. It costs around thirty euros less and is the right choice if your phone lasts long enough or if you already have a USB port on board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eThree mounts, not interchangeable\u003c\/h2\u003e\n\u003cp\u003eThe second choice concerns where to mount it. The base cannot be replaced after purchase: measure the tube before ordering.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar mount\u003c\/strong\u003e — clamp for Ø 22, 25 (1\"), 28 and 32 mm tubes. This is the version for most adventure bikes and naked bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS bar mount\u003c\/strong\u003e — for Ø 12–13 mm crossbars and accessory bars, already found above the instrument panel on many adventure bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror mount\u003c\/strong\u003e — for stems up to 10.2 mm in diameter, typical of scooters and small-displacement motorcycles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eOne-handed locking and unlocking\u003c\/h2\u003e\n\u003cp\u003eInsert the phone by pushing it against the upper claw, which clicks into place and holds it securely. To release it, press the PUSH button beneath the mount body: no knob to unscrew and no screw to adjust each time. It can be operated while wearing gloves, even winter gloves.\u003c\/p\u003e\n\u003cp\u003eThe side slides are adjustable and extend from 136.5 mm to 184.5 mm, adapting to the phone's actual width with the case already fitted.\u003c\/p\u003e\n\n\u003ch2\u003eCharging, on the versions that include it\u003c\/h2\u003e\n\u003cp\u003eThere are two ways to charge. The induction pad delivers up to 15 W and activates when you place the phone on it. The Type-C port provides up to 24 W with fast PD charging, useful when navigation is active with the screen at maximum brightness and induction alone cannot keep up with power consumption.\u003c\/p\u003e\n\u003cp\u003eIn both cases, the actual power reached depends on the protocol supported by the phone: many devices stop below the maximum value, and at high temperatures they reduce or interrupt charging to protect the battery. The LOBOO right-angle cable for the Type-C port is an optional accessory and is not included in the package.\u003c\/p\u003e\n\u003cp\u003eThe mount has no built-in battery. It must be powered by the motorcycle's 12–16 V direct-current electrical system. The electronics include eight protections: reverse polarity, short circuit, overvoltage, overcurrent, overload, undervoltage, overtemperature and foreign-object detection.\u003c\/p\u003e\n\n\u003ch2\u003eVibrations: what it does and does not do\u003c\/h2\u003e\n\u003cp\u003eThe damping structure works across three layers of silicone — main, central and lower — and breaks the direct vibration path between the handlebar and the phone, reducing both the sharp impacts from potholes and the engine's high-frequency buzzing. It is identical across all six configurations.\u003c\/p\u003e\n\u003cp\u003eLOBOO explicitly states that the system attenuates vibrations but does not eliminate them completely. On large-displacement twin-cylinder and single-cylinder engines at low speeds, some residual vibration still reaches the device. If you use a smartphone with optical image stabilization, consider this before buying: no mount on the market guarantees complete elimination.\u003c\/p\u003e\n\n\u003ch2\u003ePhone compatibility\u003c\/h2\u003e\n\u003cp\u003eCheck these values with the case already fitted: width from 65 to 98 mm, length from 125 to 170 mm, thickness up to 13 mm. Outside these limits, the claws will not close correctly.\u003c\/p\u003e\n\u003cp\u003eOn versions with a charging module, induction works through thin plastic, rubber or lightweight leather cases. Magnetic rings, metal plates for magnetic mounts and Popsockets may shield the field or trigger foreign-object protection.\u003c\/p\u003e\n\u003cp\u003eAll dimensions, power ratings and compatibility limits are listed in the «Technical specifications» tab below.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buy from Endurrad\u003c\/h2\u003e\n\u003cp\u003eEndurrad specializes in accessories for adventure and touring motorcycles. Before you order, we can help you determine which of the six configurations your motorcycle needs and, if you choose the version with charging, where to take switched power from: send us the model and year, and we will point you to the correct one.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"For Ø 22\/25\/28\/32mm \/ With wireless charging","offer_id":48120946491736,"sku":"PH02S-WXBZ","price":81.0,"currency_code":"EUR","in_stock":false},{"title":"For Ø 12\/13 mm \/ With wireless charging","offer_id":48120946524504,"sku":"PH02S-HC13MM","price":81.0,"currency_code":"EUR","in_stock":true},{"title":"For Ø ≤10.2 mm \/ With wireless charging","offer_id":48120946557272,"sku":"PH02S-WXMR","price":81.0,"currency_code":"EUR","in_stock":true},{"title":"For Ø 22\/25\/28\/32mm \/ No reload","offer_id":57927410843992,"sku":"PH02S-BZ","price":54.0,"currency_code":"EUR","in_stock":false},{"title":"For Ø 12\/13 mm \/ No reload","offer_id":57927410876760,"sku":"PH02S-WC13MM","price":54.0,"currency_code":"EUR","in_stock":false},{"title":"For Ø ≤10.2 mm \/ No reload","offer_id":57927410909528,"sku":"PH02S-MR","price":54.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-smartphone-moto-loboo-ph02-2383656.jpg?v=1754635074"},{"product_id":"supporto-smartphone-moto-loboo-ph06","title":"Aluminum motorcycle smartphone mount with magnetic damping","description":"\u003cp\u003eThe LOBOO PH06 is the premium smartphone mount in the range: machined aluminum alloy body, anti-vibration magnetic base, 15 W wireless charging, and a Type-C port with fast charging up to 36 W. It is available with four mounting types, all with the charging module integrated.\u003c\/p\u003e\n\n\u003ch2\u003eMagnetic damping is the reason this model exists\u003c\/h2\u003e\n\u003cp\u003eHigh-frequency handlebar vibrations can permanently damage a smartphone’s optical stabilizer. This is a known failure and is not covered by warranty, and rigid mounts encourage it because they transfer everything that passes through the handlebar to the phone.\u003c\/p\u003e\n\u003cp\u003eThe PH06 features an anti-vibration magnetic base that lets the phone-holder module “float”: greater oscillation amplitude, lower transmitted intensity. This is the key difference compared with the PH02S, which uses silicone dampers. No mount eliminates vibrations entirely, but the difference is noticeable on rough surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eFour non-interchangeable mounting options\u003c\/h2\u003e\n\u003cp\u003eThis is the only choice to make when ordering, and it must be made by measuring the exact point where you want to mount the holder: the base cannot be replaced after purchase.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard model\u003c\/strong\u003e — clamp for Ø 22, 25.4 (1\"), 28, and 32 mm tubes, with all four bushings already included in the package. This is the version for most large adventure bikes and naked bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13 mm model\u003c\/strong\u003e — for Ø 12–13 mm crossbars and accessory bars, such as those already found above the instrument panel on many adventure bikes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror model\u003c\/strong\u003e — for stems up to 10.2 mm in diameter, typical of scooters and small-displacement motorcycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSportbike model\u003c\/strong\u003e — attaches to the steering-plate hole with two expansion bushings, for diameters from 12 to 25.4 mm. It is the solution for supersport bikes, where there is no room on the clip-on handlebar.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll four versions in the catalog have the charging module integrated: only the mounting base changes.\u003c\/p\u003e\n\n\u003ch2\u003eSnap locking, one-finger release\u003c\/h2\u003e\n\u003cp\u003eThe phone charges from the top and locks into place without tools. To remove it, simply press the release button beneath the body: it can be done with one hand and while wearing gloves, even winter gloves. The upper claw is extendable and the two side claws are adjustable, all with silicone pads.\u003c\/p\u003e\n\u003cp\u003eRotation is handled by a mechanical gear structure: it maintains its position without drifting under vibration and lets you switch from portrait to landscape in one second.\u003c\/p\u003e\n\n\u003ch2\u003e15 W wireless charging and 36 W cable charging\u003c\/h2\u003e\n\u003cp\u003eThe induction pad delivers up to 15 W and activates when you place the phone on it. When more power is needed, the Type-C port reaches 36 W with fast charging: this is enough to restore charge even with the navigator active and the screen at maximum brightness under the sun.\u003c\/p\u003e\n\u003cp\u003eActual power depends on the protocol supported by the phone and the ambient temperature. The LOBOO angled cable is an optional accessory and is not included: the Type-C to Type-C version supports 60 W, while the Type-C to Lightning version supports 27 W; both are 230 mm long.\u003c\/p\u003e\n\u003cp\u003eThe mount has no internal battery and must be powered by the motorcycle’s 12–16 V DC electrical system, preferably from a switched positive connection. The electronics include eight protections: reverse polarity, short circuit, overvoltage, undervoltage, overcurrent, overload, overheating, and foreign-object detection.\u003c\/p\u003e\n\n\u003ch2\u003ePhone compatibility\u003c\/h2\u003e\n\u003cp\u003eMeasurements must be checked with the case already installed: width from 65 to 92 mm, length from 125 to 169 mm, and thickness up to 12.5 mm. These limits are narrower than those of the PH02S, so with large phones it is worth measuring carefully before ordering.\u003c\/p\u003e\n\u003cp\u003eWireless charging works through thin cases made of plastic, rubber, or lightweight leather. Magnetic rings, metal plates for magnetic mounts, and Popsockets can shield the field or trigger foreign-object protection.\u003c\/p\u003e\n\u003cp\u003eDimensions, power ratings, hardware, and tightening torques for the four configurations are listed in the “Technical specifications” tab below.\u003c\/p\u003e\n\n\u003ch2\u003eWhy buy from Endurrad\u003c\/h2\u003e\n\u003cp\u003eEndurrad specializes in accessories for adventure and touring motorcycles. Before ordering, we can help you determine which mount your motorcycle needs and where to connect the switched power supply: send us the model and year, and we will point you to the correct configuration.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"For Ø 22\/25\/28\/32mm","offer_id":48126523507032,"sku":"PH06-WXBZ","price":162.0,"currency_code":"EUR","in_stock":false},{"title":"For Ø 12-13mm","offer_id":48126523474264,"sku":"PH06-HC13MM","price":162.0,"currency_code":"EUR","in_stock":true},{"title":"For Ø ≤10.2 mm","offer_id":54022868762968,"sku":"PH06-WXMR","price":162.0,"currency_code":"EUR","in_stock":true},{"title":"For sport bikes Ø 12-25.4 mm","offer_id":57927447347544,"sku":"PH06-WXBZS","price":162.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-smartphone-moto-loboo-ph06-6450017.jpg?v=1754635073"},{"product_id":"staffa-navigazione-gps-cfmoto-800-mt","title":"GPS navigator mount for CFMOTO 800 MT | 150 mm crossbar, 12 or 22 mm version, no drilling","description":"\u003cp\u003eThe \u003cstrong\u003eLOBOO CDZ602 GPS Navigation Bracket for CFMOTO 800 MT\u003c\/strong\u003e positions the navigator within view, reducing vibrations that make the display difficult to read on uneven surfaces and strain the eyes over long rides.\u003c\/p\u003e\n\n\u003cp\u003eIt is available in \u003cstrong\u003etwo versions\u003c\/strong\u003e, to be selected according to the mounting point:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 mm\u003c\/strong\u003e — mounting on the dedicated bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 mm\u003c\/strong\u003e — direct mounting on the handlebar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eMeasure the diameter before ordering:\u003c\/strong\u003e choosing the wrong size is the most common mistake with this product.\u003c\/p\u003e\n\n\u003ch2\u003eMain features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-vibration design\u003c\/strong\u003e for a stable view on paved and unpaved roads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngle adjustment\u003c\/strong\u003e to eliminate glare and adapt to the riding position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide compatibility\u003c\/strong\u003e with major GPS navigators\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-resistant materials\u003c\/strong\u003e for year-round use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAesthetic integration\u003c\/strong\u003e with the lines of the 800 MT\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatible with \u003cstrong\u003eCFMOTO 800 MT from 2023 onward\u003c\/strong\u003e. Navigator not included.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"12MM","offer_id":48237641433432,"sku":"CDZ602-12MM","price":54.0,"currency_code":"EUR","in_stock":true},{"title":"22MM","offer_id":48237656834392,"sku":"CDZ602-22MM","price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-navigatore-gps-cfmoto-800mt-dettaglio-traversa-sul-cupolino.jpg?v=1788326318"},{"product_id":"cover-display-aio-chigee","title":"AIO Chigee Display Cover - Endurrad","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eChigee AIO Display Cover: Perfect Protection for Your Device\u003c\/h2\u003e\n\u003cp\u003eThe AIO Chigee Display Cover is designed to provide optimal protection for your screen. This product combines high-quality materials with an elegant design, offering a robust and practical solution for those who want to keep their devices intact. Our case is suitable for a wide range of devices, ensuring excellent protection against scratches, bumps, and dust.\n\u003cp\u003eOne of the main advantages of the Chigee AIO Display Cover is its durability. The material used is highly durable, so your device will always be protected, even in difficult conditions. In addition, the case is easy to install and remove, making it easy to access your device at any time. You won't have to worry about complicated installation procedures or damaging your screen when applying the case.\n\u003cp\u003eAnother important aspect is the design. The Chigee AIO Display Cover not only offers protection, but is also aesthetically pleasing. With a slim and modern design, this case blends in perfectly with the style of your device without compromising its aesthetics. You can therefore benefit from robust protection without having to sacrifice the visual appearance of your device.\n\u003cp\u003eThe versatility of the Chigee AIO Display Cover makes it the ideal choice for anyone who wants reliable and stylish protection for their screens. No matter what device you use, the Chigee AIO Display Cover will provide the protection you need, keeping your screen clean and flawless.\n\u003cp\u003eFinally, maintenance is quick and easy. The Chigee AIO Display Cover is easy to clean and maintain, so you can always enjoy a flawless device. Thanks to its anti-dust and anti-fingerprint features, your screen will remain clear and bright as new, ensuring an optimal user experience. Investing in the Chigee AIO Display Cover means protecting your device and significantly extending its operational life.\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Custodia_in_silicone_descrizione_1.png?v=1723020588\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Custodia_in_silicone_descrizione_4.png?v=1723020587\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Custodia_in_silicone_descrizione_3.png?v=1723020587\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Custodia_in_silicone_descrizione_5.png?v=1723020587\" alt=\"\"\u003e\u003c\/p\u003e","brand":"CHIGEE","offers":[{"title":"Default Title","offer_id":49673764634968,"sku":"MFP0130","price":18.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/cover-display-aio-chigee-2890454.jpg?v=1754634931"},{"product_id":"cgrc-can-per-aio-5-play-bmw","title":"CGRC CAN for AIO 5 Play BMW - Endurrad","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eCGRC CAN for AIO 5 Play BMW\u003c\/h2\u003e\n\u003cp\u003eThe CGRC CAN for AIO 5 Play BMW is compatible with BMW motorcycle models equipped with a multi-controller, enabling safe and efficient use of the AIO 5 without taking your hands off the handlebars. Thanks to this multi-controller, you can enjoy a more comfortable and safer ride.\u003c\/p\u003e\n\u003cp\u003eThe CGRC CAN for AIO 5 Play BMW is the ideal accessory for easily configuring the CGRC CAN with your motorcycle. By connecting the module to the 4- or 8-pin port, you can monitor tire pressure or install an anti-theft system, saving time and effort. Purchase the appropriate pin connectors for your specific motorcycle and enjoy a simple, intuitive installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e※For 2022\/2023 K1600 and 2023 1250RT models, installing the CGRC-CAN may cause conflicts between the integrated controls and the BMW TFT display.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/p.jpg?v=1723630944\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/BMW.jpg?v=1723630945\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/4pin.jpg?v=1723630944\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/install.jpg?v=1723630944\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/8pin.jpg?v=1728045490\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/8pin-2.jpg?v=1728045491\" alt=\"\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/CGRC_Remote_Control_CAN_For_BMW_2_1.jpg?v=1728045652\" alt=\"\"\u003e\u003c\/p\u003e","brand":"CHIGEE","offers":[{"title":"4 PIN - GS\\GSA","offer_id":50052349624664,"sku":"MFP0120","price":50.0,"currency_code":"EUR","in_stock":true},{"title":"8 PIN - C\\FS\\R\\K","offer_id":50052349657432,"sku":"MFP0121","price":50.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/cgrc-can-per-aio-5-play-bmw-5830245.jpg?v=1754634929"},{"product_id":"controller-wireless-display-chigee-2-4-ghz-per-serie-aio-5-1","title":"Chigee 2.4 GHz Wireless Display Controller for AIO 5 Series","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eDiscover the Chigee 2.4 GHz Wireless Display Controller, designed for easy installation without complicated wiring. With a button layout designed for use without gloves, multifunctional features, and long battery life, it is ideal for users of the AIO 5 series. Enhance your riding experience with an intuitive, safe, and easy-to-use remote control.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/XPp7376_KYs?si=9r9xYYaV6a3JvvtM\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Controller_Wireless_Display_Chigee-1.png?v=1731400406\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Controller_Wireless_Display_Chigee-2.png?v=1731400404\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/0dNO8OgxULE?si=WTGQqPRKzpcfgx_p\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*Note: \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e1.\u003c\/strong\u003e The AIO-5 series can connect to only one Bluetooth device at a time. This means that you cannot use the CGRC CAN\/LIN and the MFP0089 wireless remote control simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Do not use threadlocker on the Pro wireless remote control. Threadlocker can cause plastic components to deteriorate and become brittle, resulting in damage to or malfunction of the remote control. Any damage resulting from the use of threadlocker is not covered by the warranty.\u003c\/p\u003e","brand":"CHIGEE","offers":[{"title":"Default Title","offer_id":53587188121944,"sku":"MFP0089","price":54.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/controller-wireless-display-chigee-24-ghz-per-serie-aio-5-9637536.png?v=1754634925"},{"product_id":"valvole-pneumatici-moto-con-sensori-di-pressione-chigee","title":"Motorcycle tire valves with Chigee pressure sensors","description":"\u003cp\u003eMonitor your motorcycle’s tire pressure in real time with Chigee Motorcycle Tire Valves with Pressure Sensors, compatible with Chigee AIO-5 Play, AIO-5 Lite, and AIO-5 Play BMW Edition displays. With a measurement range of 0 to 8 BAR and an accuracy of 0.01 BAR, these sensors provide maximum safety and control. Long-lasting battery (2–3 years, non-replaceable) and compact design (25x25x49.5 mm).\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAIO-5 Lite\u003c\/li\u003e\n\u003cli\u003eAIO-5 Play\u003c\/li\u003e\n\u003cli\u003eAIO-5 Play for BMW\u003c\/li\u003e\n\u003cli\u003eXR-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"CHIGEE","offers":[{"title":"Default Title","offer_id":53587860914520,"sku":"MFP0018","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/valvole-pneumatici-moto-con-sensori-di-pressione-chigee-7368951.png?v=1754634922"},{"product_id":"cappucci-valvole-con-sensori-di-pressione-chigee","title":"Valve caps with Chigee pressure sensors","description":"\u003cp\u003eDiscover Chigee Valve Caps with Pressure Sensors for real-time tire monitoring. Easy to install, made from high-quality aluminum alloy, and featuring a long-lasting battery, they provide simultaneous pressure and temperature readings for a safer ride.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with the following models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAIO-5 Lite\u003c\/li\u003e\n\u003cli\u003eAIO-5 Play\u003c\/li\u003e\n\u003cli\u003eAIO-5 Play BMW Edition\u003c\/li\u003e\n\u003cli\u003eXR-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/6tzqnQ0N2WU?si=b4Q6knB3YTmajYdo\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Descrizione_Cappucci_valvole_chigee_1.webp?v=1731403520\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Descrizione_Cappucci_valvole_chigee_2.webp?v=1731403519\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/Descrizione_Cappucci_valvole_chigee_3.webp?v=1731403519\"\u003e\u003c\/p\u003e","brand":"CHIGEE","offers":[{"title":"Default Title","offer_id":53587993592152,"sku":"MFP0019","price":50.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/cappucci-valvole-con-sensori-di-pressione-chigee-7730418.png?v=1754634913"},{"product_id":"supporto-manubrio-per-telecomando-chigee-mfp0089-mfp0115","title":"Handlebar Mount for CHIGEE MFP0089 (MFP0115) Remote Control","description":"\u003ch2\u003eCHIGEE MFP0089 (MFP0115) Remote Handlebar Mount | Quick Installation, 6061 Aluminum, Compatible with Ø22–32 mm\u003c\/h2\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003ch3\u003e🔩 \u003cstrong\u003eThe cleanest way to keep the Remote within thumb's reach\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe CHIGEE MFP0089 Remote Handlebar Mount is the dedicated accessory for mounting the \u003cstrong\u003eCHIGEE MFP0089 remote control\u003c\/strong\u003e directly on the handlebar, with simple installation and a secure grip even on rough terrain.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandlebar compatibility\u003c\/strong\u003e Ø \u003cstrong\u003e22–32 mm\u003c\/strong\u003e (depending on version\/ring)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6061 aluminum\u003c\/strong\u003e for lightness and rigidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact profile\u003c\/strong\u003e and thumb-reachable position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; play installation\u003c\/strong\u003e with dedicated ring\/clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable anti-vibration mounting\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e⚙️ \u003cstrong\u003eMaterials and construction details\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eBody made of \u003cstrong\u003e6061 aluminum alloy\u003c\/strong\u003e, with dimensions optimized to take up little space on the handlebar and provide a precise mounting surface for the \u003cstrong\u003eMFP0089\u003c\/strong\u003e Remote.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003e6061 aluminum\u003c\/strong\u003e (strong and lightweight)\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eCompact dimensions\u003c\/strong\u003e for crowded cockpits\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eDedicated interface\u003c\/strong\u003e for the MFP0089 remote control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 1.5rem; font-weight: bold; margin-bottom: 1rem;\"\u003e5 Reasons to Choose the MFP0115 Handlebar Mount\u003c\/h2\u003e\n\u003col style=\"padding-left: 1.2rem; line-height: 1.6; margin: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy does it exist?\u003c\/strong\u003e\u003cbr\u003eTo \u003cem\u003eposition the\u003c\/em\u003e CHIGEE MFP0089 remote control ergonomically, securely, and always within reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy choose it?\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e6061 aluminum\u003c\/em\u003e, a \u003cem\u003ededicated clamp\u003c\/em\u003e for the most common diameters, and a \u003cem\u003ereduced footprint\u003c\/em\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy is it reliable?\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003eHeavy-duty\u003c\/em\u003e material and \u003cem\u003eanti-vibration\u003c\/em\u003e locking, even on dirt roads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy is the price justified?\u003c\/strong\u003e\u003cbr\u003eIt improves \u003cem\u003econtrol and safety\u003c\/em\u003e by making the most of the Remote without improvised solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhy does it make life better for riders?\u003c\/strong\u003e\u003cbr\u003eControls \u003cem\u003ewithin thumb's reach\u003c\/em\u003e, an organized cockpit, and installation in just a few minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr\u003e\n\u003ch3\u003e🛠️ \u003cstrong\u003eInstallation\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eOpen the \u003cstrong\u003eclamp\u003c\/strong\u003e, position the mount in the most convenient area of the handlebar (without interfering with cables\/controls), and tighten the screws using \u003cstrong\u003emedium-strength threadlocker\u003c\/strong\u003e. Attach the \u003cstrong\u003eMFP0089\u003c\/strong\u003e to the mount plate and check full steering clearance. Recheck the tightness after 100–200 km.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e🏍️ \u003cstrong\u003eIdeal for\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCHIGEE AIO-5 \/ AIO-6 with \u003cstrong\u003eMFP0089\u003c\/strong\u003e remote control\n\u003c\/li\u003e\n\u003cli\u003eTouring, commuting, and ADV\u003c\/li\u003e\n\u003cli\u003eClean installations with controls within easy reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ctable class=\"product-specs\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #707070; color: #fff;\"\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 8px; text-align: left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ccc; padding: 8px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eApplication\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eMounting the \u003cstrong\u003eCHIGEE MFP0089 remote control\u003c\/strong\u003e on the handlebar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eCompatible diameters\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\n\u003cstrong\u003eØ 22 \/ 25–28,6 \/ 32 mm\u003c\/strong\u003e (depending on version\/ring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\u003cstrong\u003e6061 aluminum alloy\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\n\u003cstrong\u003e≈ 89,4 × 37,5 × 19,2 mm\u003c\/strong\u003e (approximate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eCode\/SKU\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\n\u003cstrong\u003eMFP0115\u003c\/strong\u003e (dedicated handlebar mount)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003ePackage contents\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\n\u003cstrong\u003eMFP0115 handlebar mount\u003c\/strong\u003e; ring\/clamp depending on version. \u003cem\u003eMFP0089 remote control not included\u003c\/em\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eNotes\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eCheck your handlebar \u003cstrong\u003ediameter\u003c\/strong\u003e and choose the correct version; position it away from moving parts\/cables.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003eService\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ccc; padding: 8px;\"\u003e\n\u003cstrong\u003eFree shipping\u003c\/strong\u003e from €100 (Italy) \/ €250 (EU) • \u003cstrong\u003e15-day returns\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cbr\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-top: 20px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #707070; color: #fff;\"\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left; font-weight: bold;\"\u003eQuestion\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left; font-weight: bold;\"\u003eAnswer\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIs it compatible with all handlebars?\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIt is compatible with the most common diameters: \u003cstrong\u003eØ 22 \/ 25–28,6 \/ 32 mm\u003c\/strong\u003e. Choose the correct version for your handlebar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eDo I need to drill or modify anything?\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e\n\u003cstrong\u003eNo\u003c\/strong\u003e, installation is \u003cstrong\u003eplug \u0026amp; play\u003c\/strong\u003e with the included clamp.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIs the MFP0089 remote control included?\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e\n\u003cstrong\u003eNo\u003c\/strong\u003e, it is sold separately. This item is the dedicated \u003cstrong\u003ehandlebar mount\u003c\/strong\u003e.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eIs it resistant to rain and vibrations?\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e\n\u003cstrong\u003eYes\u003c\/strong\u003e, the 6061 aluminum and clamp mounting ensure stability even on rough terrain.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"CHIGEE","offers":[{"title":"Default Title","offer_id":55769757548888,"sku":"MFP0115","price":13.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-manubrio-per-telecomando-chigee-mfp0089-mfp0115-9730377.png?v=1758349695"},{"product_id":"sensori-tpms-moto-bluetooth-jado-controllo-pressione-ip67","title":"Pair of Bluetooth motorcycle tire pressure sensors – JADO S6","description":"\u003cp\u003eThe pair of JADO TPMS sensors screws on in place of the valve caps, one on the front wheel and one on the rear, and displays tire pressure and temperature in real time on the JADO S6 display.\u003c\/p\u003e\n\u003cp\u003eThey measure from 0 to 800 kPa (0–8 bar, 0–116 PSI) with an accuracy of 0.1 bar, and the display alerts you as soon as a value falls outside the range, before a slow leak turns into a roadside stop. No tire removal is required. The battery is replaceable and lasts 2 years or 30,000 km.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe sensors do not work on their own:\u003c\/strong\u003e the JADO S6 display and pairing through its menu are required.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56174368194904,"sku":"A-TR-A","price":40.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/jado-tpms-sensor-moto-bluetooth-ip67-9703280.png?v=1763056778"},{"product_id":"telecamera-moto-jado-1080p-sensore-sony-imx307-starvis","title":"2-camera 1080p Sony Starvis motorcycle camera kit for JADO S6 display","description":"\u003cp\u003eThe kit includes two 1080p motorcycle cameras with Sony IMX307 Starvis sensors, one for the front and one for the rear, and enables recording on the JADO S6 display.\u003c\/p\u003e\n\u003cp\u003eConnected to the JADO S6, they record in 1080P at 30 fps, in 1 \/ 3 \/ 5-minute loops, with color night vision and video lock in the event of an impact. The camera also supports the display's blind spot detection (BSD) radar, which issues an on-screen warning when a vehicle enters the blind spot.\u003c\/p\u003e\n\u003cp\u003eThe body is made of zinc alloy with IP69K waterproofing, and the lens is wide-angle and vibration-resistant. \u003cstrong\u003eThe cameras do not work on their own:\u003c\/strong\u003e they require the JADO S6 display.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56174368227672,"sku":"A-SXT-A-2","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/jado-camera-2mp-sony-imx307-8725179.png?v=1763056779"},{"product_id":"telecomando-bluetooth-da-manubrio-per-jado-s6-s1","title":"Bluetooth handlebar remote control for JADO S6 display","description":"\u003cp\u003eThe JADO Bluetooth remote mounts on the handlebar and controls the JADO S6 display without touching the screen: menus, calls, music, and recording while keeping your hands on the grips.\u003c\/p\u003e\n\u003cp\u003eThe buttons are designed for use with gloves, and installation requires no special tools. It is resistant to rain and dust. \u003cstrong\u003eDoes not work on its own:\u003c\/strong\u003e the JADO S6 display is required.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56174368293208,"sku":"A-KZQ-A","price":37.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/jado-remote-telecomando-manubrio-moto-4751920.png?v=1763056733"},{"product_id":"staffa-navigazione-gps-bmw-r-1300-gs","title":"GPS Navigator Mount for BMW R 1300 GS | Ø 12 mm aluminum crossbar, no drilling","description":"\u003cp\u003eThe \u003cstrong\u003eLOBOO CDZ131 GPS mount\u003c\/strong\u003e is an \u003cstrong\u003eanodized CNC-machined aluminum\u003c\/strong\u003e bracket with a 12 mm diameter, designed for the \u003cstrong\u003eBMW R 1300 GS from 2023 onward\u003c\/strong\u003e. The dual-axis design expands the usable cockpit surface: you can mount a navigator, smartphone, and accessories while maintaining a clear line of sight to the road and dashboard.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is \u003cstrong\u003elossless\u003c\/strong\u003e: it attaches to the cockpit's original mounting points without drilling holes, cutting, or making permanent modifications. Once removed, the motorcycle returns exactly to its factory condition — a detail that matters when reselling it.\u003c\/p\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-axis design\u003c\/strong\u003e for mounting multiple devices without cluttering the cockpit\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e12 mm mount diameter\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized and sandblasted CNC-machined aluminum\u003c\/strong\u003e for strength and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeveloped using the vehicle's original data\u003c\/strong\u003e: precisely positioned holes, not a universal adaptation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eReversible installation and removal\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCheck the version carefully:\u003c\/strong\u003e the CDZ131 is compatible exclusively with the \u003cstrong\u003eR 1300 GS\u003c\/strong\u003e. It does not fit the \u003cstrong\u003eR 1300 GS Adventure\u003c\/strong\u003e, which has a different cockpit. Navigator and device mounts not included.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"Default Title","offer_id":56180502856024,"sku":"CDZ131","price":108.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-navigatore-gps-bmw-r-1300-gs-montata-con-porta-smartphone.jpg?v=1788327028"},{"product_id":"monitor-moto-carplay-android-auto-dashcam-jado-s6","title":"6\" IP69K CarPlay and Android Auto display for motorcycles - JADO S6","description":"\u003ch2\u003eStop damaging your iPhone camera. Jado S6 transforms your motorcycle's dashboard by bringing Apple CarPlay and Android Auto to it wirelessly. Keep your phone safe in your pocket and use Waze, Google Maps, Spotify, and calls directly on an ultra-bright 6-inch screen designed to remain visible even in direct midday sunlight.\u003c\/h2\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56259026223448,"sku":"S6","price":379.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/jado-s6-monitor-moto-6-wireless-con-carplay-android-auto-6993793.png?v=1778850155"},{"product_id":"modulo-quick-release-dedicato-per-jado-s6-compatibile-con-bmw-predisposizione-originale","title":"Quick-release mount for BMW navigation preparation - JADO S6","description":"\u003cp\u003eThe JADO quick-release module mounts the JADO S6 display on the original navigation mount of BMW motorcycles, in place of the factory navigation system, without additional handlebar brackets.\u003c\/p\u003e\n\u003cp\u003eIt attaches with one hand: align it, press until it clicks, and activate the safety lever. The dual locking mechanism keeps the display secure even on uneven roads, and when you leave the motorcycle, you can remove it in an instant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReading BMW data:\u003c\/strong\u003e JADO indicates this on the S6 product page, but the module’s product sheet currently lists it as unsupported; this must be confirmed with the manufacturer. On BMW motorcycles up to 2014, the S6 does not read factory data and works only with a wired connection.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56476528345432,"sku":"BMKC","price":82.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/modulo-quick-release-dedicato-per-jado-s6-compatibile-con-bmw-predisposizione-originale-3809575.png?v=1767447848"},{"product_id":"supporto-moto-cannotto-sterzo-a-espansione-12-30mm-per-sportive-alluminio-anti-vibrazione","title":"Motorcycle handlebar stem mount with expansion, 12–30 mm hole – JADO S6","description":"\u003cp\u003eThe JADO steering stem mount locks into the steering plate hole by expansion, fitting diameters from 12 to 30 mm and depths greater than 38 mm, and positions the JADO S6 display in the center of the motorcycle.\u003c\/p\u003e\n\u003cp\u003eIt is the solution for motorcycles without a crossbar, such as sport bikes with clip-on handlebars: no drilling or modifications are needed because it uses the existing hole. The viewing angle is adjustable, allowing you to orient the display toward you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the hole before ordering:\u003c\/strong\u003e diameter from Ø 12 to Ø 30 mm and depth over 38 mm.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56476779610456,"sku":"B3","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-moto-cannotto-sterzo-a-espansione-12-30mm-per-sportive-alluminio-anti-vibrazione-5586691.png?v=1767447848"},{"product_id":"supporto-crossbar-moto-o12-16-mm-staffa-a-morsetto-in-alluminio-jado","title":"Motorcycle crossbar mount Ø 12–16 mm clamp – JADO S6","description":"\u003cp\u003eThe JADO crossbar mount clamps onto round crossbars with diameters from 12 to 16 mm and positions the JADO S6 display high and clearly visible, without drilling or modifying the motorcycle.\u003c\/p\u003e\n\u003cp\u003eIt is designed for motorcycles with a handlebar crossbar: installation has a factory-style, low-profile design, and the cables remain neatly routed. The viewing angle is adjustable, so you can tilt the display toward you and read it without lowering your gaze.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMeasure the crossbar before ordering:\u003c\/strong\u003e the clamp works only with round tubes from Ø 12 to Ø 16 mm.\u003c\/p\u003e","brand":"JADO","offers":[{"title":"Default Title","offer_id":56588576391512,"sku":"B2","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-crossbar-moto-o12-16-mm-staffa-a-morsetto-in-alluminio-jado-1755344.png?v=1769320749"},{"product_id":"centralina-cansmart-denali-bmw-r1250gs-dnlwhs11602","title":"CANsmart GEN II motorcycle accessory controller for BMW R 1250 GS and R 1200","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS11602\u003c\/strong\u003e — DENALI code DNL.WHS.11602\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that uses your \u003cstrong\u003eBMW CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the Wonder Wheel\u003c\/strong\u003e, without adding handlebar switches or loose relays under the seat. It plugs into the original connectors: nothing needs to be cut or drilled.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light — but each can be reconfigured for any accessory within that limit. The CANsmart Accessory Manager software unlocks dozens of settings: flashing with the high beams, strobing with the horn, automatic shutoff with the turn signals, an electronic fuse for each circuit, and five-level heated clothing control.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e R 1200 GS LC 2013-2018, R 1200 GS LC Adventure 2014-2018, R 1200 R and RS 2015-2018, R 1200 RT 2014-2018, R 1250 GS 2019-2023, R 1250 GS Adventure 2019-2024, R 1250 RT 2019-2024, R 1250 R and RS 2020-2024.\u003c\/p\u003e\n\n\u003cp\u003eFor the R 1300 GS, use code DNLWHS25900; for the K 1600, S 1000 XR, F 900 XR, F 850 GS, and F 750 GS, use DNLWHS11702.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617351872856,"sku":"DNLWHS11602","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-bmw.png?v=1769918493"},{"product_id":"centralina-cansmart-denali-bmw-k1600-s1000xr-f850gs-dnlwhs11702","title":"CANsmart accessory controller for BMW K 1600, S 1000 XR, and F 850 GS, CANsmart GEN II","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS11702\u003c\/strong\u003e — DENALI code DNL.WHS.11702\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that uses your \u003cstrong\u003eBMW's CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the Wonder Wheel\u003c\/strong\u003e, without adding handlebar switches or loose relays under the seat. It plugs into the original connectors: nothing needs to be cut or drilled.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light—but each can be reconfigured for any accessory within that limit. The CANsmart Accessory Manager software unlocks dozens of adjustments, including heated gear control: five levels on the K 1600, three on the F 900 XR, F 850, and F 750 GS.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e K 1600 GT and GTL 2011–2025, K 1600 B and Grand America, S 1000 XR from 2015, F 900 XR from 2020, F 850 GS and F 850 GS Adventure 2019–2023, F 750 GS 2019–2023, F 800 GS and F 900 GS from 2024, R 18 from 2021.\u003c\/p\u003e\n\n\u003cp\u003eFor the R 1250 GS and R 1200 LC, use code DNLWHS11602; for the R 1300 GS, use DNLWHS25900.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617351905624,"sku":"DNLWHS11702","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-bmw.jpg?v=1769679761"},{"product_id":"centralina-cansmart-denali-bmw-r1200gs-rt-dnlwhs11802","title":"BMW R 1200 GS R and RT CANsmart GEN II accessory controller","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS11802\u003c\/strong\u003e — DENALI code DNL.WHS.11802\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eCANsmart GEN II\u003c\/strong\u003e control unit for the R 1200 generation: it connects to the diagnostic socket and manages \u003cstrong\u003efour accessories\u003c\/strong\u003e — auxiliary lights, horn, auxiliary brake light — controlled by the motorcycle's original buttons, without adding switches or modifying the wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, each configurable through the CANsmart Accessory Manager software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e BMW R 1200 GS, R 1200 GS Adventure, R 1200 R, and R 1200 RT.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617351938392,"sku":"DNLWHS11802","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-bmw-2264808.jpg?v=1770007455"},{"product_id":"centralina-cansmart-denali-bmw-f800gs-k1300-dnlwhs11902","title":"BMW F 800 GS F 700 GS K 1300 accessory controller CANsmart GEN II","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS11902\u003c\/strong\u003e — DENALI code DNL.WHS.11902\u003c\/p\u003e\n\n\u003cp\u003eThe CANsmart controller for \u003cstrong\u003eearlier-generation BMWs\u003c\/strong\u003e: it uses the motorcycle’s CANbus to control up to four accessories from the original buttons, without adding handlebar switches or loose relays under the seat. It plugs into the factory connectors: no cutting or drilling required.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, but all fully configurable through the CANsmart Accessory Manager software, along with dozens of other settings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e F 650 GS Twin 2008-2012, F 700 GS 2013-2018, F 800 GS 2008-2018, F 800 GS Adventure 2014-2018, F 800 GT 2013-2019, F 800 R 2009-2018, F 800 S 2006-2010, F 800 ST 2006-2013, K 1200 GT 2006-2008, K 1300 GT 2007-2010, K 1300 S 2009-2016.\u003c\/p\u003e\n\n\u003cp\u003eBe careful not to confuse it with other versions: the 2019-on F 850 and F 750 GS use the DNLWHS11702, the R 1250 GS and R 1200 LC use the DNLWHS11602, and the R 1300 GS uses the DNLWHS25900.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617352003928,"sku":"DNLWHS11902","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-bmw-9352755.jpg?v=1770007452"},{"product_id":"centralina-cansmart-denali-harley-davidson-v-twin-dnlwhs12300","title":"CANsmart accessory control unit for over 60 Harley-Davidson V-Twin models","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS12300\u003c\/strong\u003e — DENALI code DNL.WHS.12300\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that connects \u003cstrong\u003edirectly to your Harley’s diagnostic port\u003c\/strong\u003e and controls up to \u003cstrong\u003efour accessories from the handlebar’s original switches\u003c\/strong\u003e. No additional relays, no cut wires, and no connectors to hunt for under the seat.\u003c\/p\u003e\n\n\u003cp\u003eDENALI states compatibility with \u003cstrong\u003eover 60 models\u003c\/strong\u003e: Road Glide, Street Glide, Sportster, Dyna, Softail, Touring, CVO, and Trike. The package includes \u003cstrong\u003eboth connectors\u003c\/strong\u003e for the diagnostic port—the red EURO 5 connector for 2021 and newer models, and the Deutsch connector for earlier models—so there is one kit for all generations.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, electronically fused, with dozens of settings available through the CANsmart Accessory Manager software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIf you have a Pan America\u003c\/strong\u003e, this is not the right control unit: that motorcycle has a dedicated code, DNLWHS23800.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617352135000,"sku":"DNLWHS12300","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-harley-davidson.jpg?v=1769679781"},{"product_id":"centralina-cansmart-denali-ktm-890-1290-adventure-dnlwhs21700","title":"CANsmart accessory controller for KTM 890 and 1290 Adventure from 2021","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS21700\u003c\/strong\u003e — DENALI code DNL.WHS.21700\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that uses your \u003cstrong\u003eKTM CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays under the seat. It plugs into the standard connectors: no cutting or drilling required.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all configurable through the CANsmart Accessory Manager software. This version also includes the horn activation wire.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e all KTM 890 models from 2020 onward and all 1290 models from 2021 onward.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTwo stated limitations on the 890:\u003c\/strong\u003e the auxiliary brake light is activated only by the front brake lever, and the KTM dongle functions are unavailable. For 1290 models up to 2020, 1190, 1090, 1050, and 790 models, use code DNLWHS13000 instead.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617353904472,"sku":"DNLWHS21700","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-1290-adventure-21.jpg?v=1769679840"},{"product_id":"centralina-cansmart-denali-honda-africa-twin-nt1100-dnlwhs21800","title":"CANsmart accessory controller for Honda Africa Twin CRF1100L and NT1100","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS21800\u003c\/strong\u003e — DENALI code DNL.WHS.21800\u003c\/p\u003e\n\n\u003cp\u003eThe control unit uses the \u003cstrong\u003eAfrica Twin's CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays under the seat. It plugs into the factory connectors: nothing needs to be cut or drilled.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all reconfigurable through the CANsmart Accessory Manager software along with dozens of other settings: flashing with the high beams, strobing with the horn, automatic shutoff with the turn signals, and an electronic fuse for each circuit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e Honda Africa Twin CRF1100L from 2020 to 2025, including the Adventure Sports ES and DCT versions, and the Honda NT1100 from 2025.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNot compatible with the Africa Twin CRF1000L\u003c\/strong\u003e, the previous generation: its CANbus is different.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617353970008,"sku":"DNLWHS21800","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-honda.png?v=1769679849"},{"product_id":"centralina-cansmart-denali-harley-pan-america-1250-dnlwhs23800","title":"CANsmart accessory controller for Harley-Davidson Pan America 1250","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS23800\u003c\/strong\u003e — DENALI code DNL.WHS.23800\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003ededicated controller for the Pan America\u003c\/strong\u003e, different from those for other Harley models. It connects to the motorcycle's diagnostic port and controls up to \u003cstrong\u003efour accessories using the original switches\u003c\/strong\u003e, with more than thirty-five programmable settings.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, electronically fused, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all reconfigurable using the CANsmart Accessory Manager software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e Pan America 1250 and Pan America 1250 Special from 2021 onward. This code replaces the previous DNL.WHS.11600.\u003c\/p\u003e\n\n\u003cp\u003eIf you have another Harley — Road Glide, Street Glide, Sportster, Softail, or Touring — the correct controller is the DNLWHS12300.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617354887512,"sku":"DNLWHS23800","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-harley-davidson-pan-america-1250.png?v=1769679874"},{"product_id":"centralina-cansmart-denali-husqvarna-norden-901-dnlwhs24700","title":"CANsmart accessory controller for Husqvarna Norden 901 and Explorer","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS24700\u003c\/strong\u003e — DENALI code DNL.WHS.24700\u003c\/p\u003e\n\n\u003cp\u003eThe control unit uses the \u003cstrong\u003eCANbus of your Norden 901\u003c\/strong\u003e to operate up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays. It plugs into the factory connectors: nothing needs to be cut or drilled.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all configurable through the CANsmart Accessory Manager software. This version also includes the horn activation wiring.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e 2022 and 2023 Husqvarna Norden 901, and the 2023 Norden 901 Explorer.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617382674776,"sku":"DNLWHS24700","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-cansmart-per-Husqvarna.jpg?v=1769680355"},{"product_id":"centralina-cansmart-denali-ducati-desertx-multistrada-v4-dnlwhs24800","title":"CANsmart accessory control unit for Ducati DesertX and Multistrada V4 and V2","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS24800\u003c\/strong\u003e — DENALI code DNL.WHS.24800\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that harnesses your \u003cstrong\u003eDucati's CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays. It plugs into the factory connectors: nothing needs to be cut or drilled, and it can be removed without leaving any trace.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all configurable through the CANsmart Accessory Manager software along with dozens of other settings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e DesertX from 2022 onward, DesertX Rally from 2023 onward, Multistrada V4 and V4 S from 2021 onward, Multistrada V4 Rally from 2023 onward, Multistrada V2 and V2 S from 2022 to 2024.\u003c\/p\u003e\n\n\u003cp\u003eEarlier Multistrada models, such as the 1200 and 950, are not compatible with this control unit.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617385230680,"sku":"DNLWHS24800","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-cansmart-serie-ducati-desert-x-22-e-multistrada-v4-21.png?v=1769680428"},{"product_id":"centralina-cansmart-denali-yamaha-tenere-700-dnlwhs24900","title":"CANsmart accessory controller for Yamaha Ténéré 700 up to 2024","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS24900\u003c\/strong\u003e — DENALI code DNL.WHS.24900\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that uses your \u003cstrong\u003eTénéré 700's CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays. It plugs into the factory connectors: no cutting or drilling required.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all configurable through the CANsmart Accessory Manager software along with dozens of other settings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSupported motorcycles:\u003c\/strong\u003e both generations of the T7, with either an LCD or TFT dashboard — Ténéré 700 from 2019 to 2024, Rally Edition 2020–2024, World Raid 2022–2024, Extreme Edition and Explore Edition 2023–2024.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePay attention to the year:\u003c\/strong\u003e DENALI states that the 2025-and-later Ténéré 700 is not supported by this control unit. For that motorcycle, you need the universal CANsmart with the dedicated adapter.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617385263448,"sku":"DNLWHS24900","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-cansmart-yamaha-tenere-700.png?v=1769680422"},{"product_id":"supporto-smartphone-denali-ducati-desertx-mbk2210000","title":"Smartphone mount for Ducati DesertX MBK2210000","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode MBK2210000\u003c\/strong\u003e — DENALI code MBK.22.10000\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRally-style\u003c\/strong\u003e mount designed for the \u003cstrong\u003eDucati DesertX\u003c\/strong\u003e: it positions a \u003cstrong\u003e12 mm accessory bar\u003c\/strong\u003e in the ideal place above the dashboard, keeping your phone in your field of vision without having to lower your gaze.\u003c\/p\u003e\n\n\u003cp\u003eIt attaches to existing mounting points on the motorcycle, \u003cstrong\u003ewith no handlebar clamps\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe bar is sized for the DENALI phone holder with wireless charging, but it also accepts \u003cstrong\u003eRAM, QuadLock\u003c\/strong\u003e and other popular systems designed to mount on a 12 mm bar.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePhone holder not included:\u003c\/strong\u003e this is the motorcycle-specific mount.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617387557208,"sku":"MBK2210000","price":96.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/supporto-smartphone-per-ducati-desert-x.jpg?v=1769680454"},{"product_id":"centralina-cansmart-denali-bmw-r1300gs-dnlwhs25900","title":"CANsmart accessory controller for BMW R 1300 GS and R 1300 GS Adventure","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS25900\u003c\/strong\u003e — DENALI code DNL.WHS.25900\u003c\/p\u003e\n\n\u003cp\u003eThe CANsmart control unit for the \u003cstrong\u003enew BMW platform\u003c\/strong\u003e: it uses the motorcycle’s CANbus to control up to \u003cstrong\u003efour accessories from the Wonder Wheel\u003c\/strong\u003e, without adding handlebar switches or loose relays under the seat. It plugs into the original connectors and can be removed without leaving any traces.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light, all reconfigurable through the CANsmart Accessory Manager software along with dozens of other settings: flashing with the high beams, strobing with the horn, automatic shutoff with the turn signals, and an electronic fuse for each circuit.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e R 1300 GS and R 1300 GS Adventure from 2024, R 12 G\/S from 2026.\u003c\/p\u003e\n\n\u003cp\u003eThe R 1250 control unit is not interchangeable with this one: if you have an R 1250 GS or an R 1200 LC, you need code DNLWHS11602.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617410462040,"sku":"DNLWHS25900","price":365.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/centralina-smart-per-bmw-r-1300-gs-2024.jpg?v=1769680925"},{"product_id":"supporto-smartphone-denali-ducati-multistrada-v4-mbk2210100","title":"Phone mount for Ducati Multistrada V4 MBK2210100","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode MBK2210100\u003c\/strong\u003e — DENALI code MBK.22.10100\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eRally-style\u003c\/strong\u003e mount designed for the \u003cstrong\u003e2021 and later Ducati Multistrada V4\u003c\/strong\u003e: it positions a \u003cstrong\u003e12 mm accessory bar\u003c\/strong\u003e in the ideal place above the dashboard, keeping your phone high and readable without taking your eyes off the road.\u003c\/p\u003e\n\n\u003cp\u003eIt attaches to existing mounting points on the motorcycle, \u003cstrong\u003ewith no handlebar clamps\u003c\/strong\u003e. Mounting hardware included.\u003c\/p\u003e\n\n\u003cp\u003eThe bar is sized for the DENALI phone holder with wireless charging, but it also accepts \u003cstrong\u003eRAM, QuadLock\u003c\/strong\u003e and other popular systems designed to mount on a 12 mm bar.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePhone holder not included:\u003c\/strong\u003e this is the motorcycle-specific mount.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617418588504,"sku":"MBK2210100","price":51.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/denali-supporto-portatelefono-ducati-multistrada-v4-2021.png?v=1769681135"},{"product_id":"centralina-cansmart-denali-aprilia-tuareg-660-dnlwhs26500","title":"Aprilia Tuareg accessory controller from 2022, CANsmart GEN II","description":"\u003cp class=\"erd-codice\"\u003e\u003cstrong\u003eCode DNLWHS26500\u003c\/strong\u003e — DENALI code DNL.WHS.26500\u003c\/p\u003e\n\n\u003cp\u003eThe control unit that uses your \u003cstrong\u003eTuareg’s CANbus\u003c\/strong\u003e to control up to \u003cstrong\u003efour accessories from the original handlebar buttons\u003c\/strong\u003e, without adding switches or loose relays. It plugs into the factory connectors: nothing needs to be cut or drilled.\u003c\/p\u003e\n\n\u003cp\u003eFour circuits rated at 10 A continuous each, 30 A total, preconfigured for two sets of DENALI auxiliary lights, a SoundBomb horn, and the B6 brake light—all configurable through the CANsmart Accessory Manager software, along with dozens of other settings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatible motorcycles:\u003c\/strong\u003e Aprilia Tuareg, from 2022 onward.\u003c\/p\u003e\n\n\u003cp\u003eFor other Aprilia models, DENALI does not currently produce a dedicated CANsmart: the solution is the universal DialDim controller.\u003c\/p\u003e","brand":"DENALI","offers":[{"title":"Default Title","offer_id":56617429959000,"sku":"DNLWHS26500","price":366.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/denali-cansmart-controller-centralina-gen-ii-per-moto-aprilia-tuareg-2022.jpg?v=1769681444"},{"product_id":"porta-cellulare-moto-antivibrazione-outplorer-p100-a","title":"Anti-vibration motorcycle phone holder with Air Suspension clamp | P100-A","description":"\u003cp\u003e\u003cstrong\u003eOutplorer P100-A\u003c\/strong\u003e is the Air Suspension kit with a clamp mount: it attaches to handlebars and tubes from 13 to 42 mm and holds your phone on an air suspension system that filters engine vibrations across all three axes. The screw clamp fits phones from 63 to 97 mm wide, with no dedicated case required.\u003c\/p\u003e\n\u003cp\u003eIt is the most versatile kit in the series: the clamp mount also fits thin tubes and handguards. If you want the phone at the base of the mirror, choose the \u003ca href=\"\/en\/products\/porta-cellulare-moto-specchietto-outplorer-p100-b\"\u003eP100-B\u003c\/a\u003e; for a classic 22-32 mm collar, choose the \u003ca href=\"\/en\/products\/porta-cellulare-moto-manubrio-outplorer-p100-c\"\u003eP100-C\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621564166488,"sku":"OT-P100-A","price":97.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-air-suspension-p100a-01.png?v=1791199981"},{"product_id":"porta-cellulare-moto-specchietto-outplorer-p100-b","title":"Anti-vibration motorcycle phone holder for mirror with Air Suspension | P100-B","description":"\u003cp\u003e\u003cstrong\u003eOutplorer P100-B\u003c\/strong\u003e is the Air Suspension kit that mounts at the base of the mirror: the BA25 ball locks beneath the mirror nut and leaves the handlebar clear. The air suspension filters vibrations across all three axes, and the screw clamp holds phones from 63 to 97 mm wide.\u003c\/p\u003e\n\u003cp\u003eUnlike the \u003ca href=\"\/en\/products\/porta-cellulare-moto-antivibrazione-outplorer-p100-a\"\u003eP100-A\u003c\/a\u003e and the \u003ca href=\"\/en\/products\/porta-cellulare-moto-manubrio-outplorer-p100-c\"\u003eP100-C\u003c\/a\u003e, it does not take up space on the handlebar: it is the right choice when controls, handguards, and risers leave little room.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621565182296,"sku":"OT-P100-B","price":84.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-air-suspension-p100b-01.png?v=1791199978"},{"product_id":"porta-cellulare-moto-manubrio-outplorer-p100-c","title":"Anti-vibration handlebar motorcycle phone holder with Air Suspension | P100-C","description":"\u003cp\u003e\u003cstrong\u003eOutplorer P100-C\u003c\/strong\u003e is the Air Suspension kit with a collar for 22 to 32 mm handlebars: the HM25 collar, with the included spacers, clamps onto the handlebar and carries the 1\" ball on which the arm operates. The air suspension filters vibrations across all three axes.\u003c\/p\u003e\n\u003cp\u003eCompared with the \u003ca href=\"\/en\/products\/porta-cellulare-moto-antivibrazione-outplorer-p100-a\"\u003eP100-A\u003c\/a\u003e, it has a more compact, cleaner collar, but it is only for tubular handlebars from 22 to 32 mm. For thinner or thicker tubes, choose the P100-A.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621565968728,"sku":"OT-P100-C","price":94.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-air-suspension-p100c-01.png?v=1791199979"},{"product_id":"supporto-action-cam-moto-manubrio-outplorer-g100","title":"Motorcycle handlebar action camera mount with GoPro attachment | G100","description":"\u003cp\u003e\u003cstrong\u003eOutplorer G100\u003c\/strong\u003e is the kit for mounting an action camera on the handlebar: the 22 to 32 mm clamp holds a 1\" ball, while the double-jointed arm connects it to the upper mount, compatible with standard action cameras such as GoPro. Aluminum, zinc alloy, stainless steel, and thermoplastic rubber.\u003c\/p\u003e\n\u003cp\u003eIt uses the same ball components as the Air Suspension phone kits: you can mount it next to a \u003ca href=\"\/en\/products\/porta-cellulare-moto-manubrio-outplorer-p100-c\"\u003eP100-C\u003c\/a\u003e or move the camera to an \u003ca href=\"\/en\/products\/morsetto-pinza-sfera-1-pollice-outplorer-hm10\"\u003eHM10\u003c\/a\u003e clamp.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621567705432,"sku":"OT-G100","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-air-suspension-g100-02.png?v=1791199980"},{"product_id":"kit-porta-cellulare-moto-barra-carbonio-outplorer-h1000","title":"Motorcycle phone holder kit with carbon fiber bar Air Suspension | H1000","description":"\u003cp\u003e\u003cstrong\u003eOutplorer H1000 Glory Knight Pro\u003c\/strong\u003e is the complete kit in the Air Suspension series: the HE10 carbon bar attaches to the handlebar with two clamps and creates space for a phone and an action camera or light. It includes the air-suspension clamp, double-jointed arm, GoPro adapter, and AT10 anti-theft knob.\u003c\/p\u003e\n\u003cp\u003eIt is the kit for those mounting multiple devices: phone, action camera, and light. If you only need the phone, choose a P100 kit (\u003ca href=\"\/en\/products\/porta-cellulare-moto-antivibrazione-outplorer-p100-a\"\u003eP100-A\u003c\/a\u003e, \u003ca href=\"\/en\/products\/porta-cellulare-moto-specchietto-outplorer-p100-b\"\u003eP100-B\u003c\/a\u003e, \u003ca href=\"\/en\/products\/porta-cellulare-moto-manubrio-outplorer-p100-c\"\u003eP100-C\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621571801432,"sku":"OT-H1000","price":146.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-air-suspension-h1000-01.png?v=1791199981"},{"product_id":"pinza-porta-cellulare-air-suspension-outplorer-ph10","title":"Anti-vibration motorcycle phone holder clamp Air Suspension | PH10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer PH10\u003c\/strong\u003e is the phone holder clamp in the Air Suspension series, the same one used in the P100 and H1000 kits: air suspension on three axes, screw closure for phones from 63 to 97 mm, and a 1\" ball on the back for connecting it to arms and clamps.\u003c\/p\u003e\n\u003cp\u003eIt cannot be mounted on the motorcycle by itself: it requires a \u003ca href=\"\/en\/products\/braccio-doppio-snodo-sfera-1-pollice-outplorer-da90\"\u003eDA90\u003c\/a\u003e double-jointed arm and a mount (clamp, collar, or mirror ball). If you are starting from scratch, a P100 kit is the best choice.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621575471448,"sku":"OT-PH10","price":60.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-ph10-supporto-smartphone-air-suspension-anti-vibrazione.jpg?v=1769711873"},{"product_id":"braccio-doppio-snodo-sfera-1-pollice-outplorer-da90","title":"Double-jointed arm for 1\" Air Suspension balls | DA90","description":"\u003cp\u003e\u003cstrong\u003eOutplorer DA90\u003c\/strong\u003e is the medium-sized double-jointed arm in the Air Suspension series: two 1\" ball sockets and a central knob that locks both in place. It is the arm included in the P100 and H1000 kits.\u003c\/p\u003e\n\u003cp\u003eUse it to replace the arm or assemble a second mount: it connects the \u003ca href=\"\/en\/products\/pinza-porta-cellulare-air-suspension-outplorer-ph10\"\u003ePH10\u003c\/a\u003e clamp to a ball mount such as the HM10 clamp or the HM25 collar.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621575668056,"sku":"OT-DA90","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-da90-braccio-doppio-snodo-misura-media.jpg?v=1769711879"},{"product_id":"braccio-magic-arm-attacco-1-4-outplorer-ma10","title":"Magic arm with 1\/4\" mounts Outplorer | MA10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer MA10\u003c\/strong\u003e is an articulated arm (magic arm) with a 1\/4\" screw at each end: the heads rotate 360° and tilt 180°, and a central knob locks the position. It is used to mount action cameras, monitors, and accessories with a standard threaded hole.\u003c\/p\u003e\n\u003cp\u003eIt does not use 1\" balls: it connects to the 1\/4\" holes on the \u003ca href=\"\/en\/products\/pinza-porta-cellulare-air-suspension-outplorer-ph10\"\u003ePH10\u003c\/a\u003e clamp, the HM10 clamp, or the \u003ca href=\"\/en\/products\/morsetto-universale-attacco-1-4-outplorer-cm10\"\u003eCM10\u003c\/a\u003e universal clamp.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621579272536,"sku":"OT-MA10","price":44.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-ma10-braccio-articolato-universale-multi-posizione.jpg?v=1769711899"},{"product_id":"morsetto-universale-attacco-1-4-outplorer-cm10","title":"Universal clamp for 13 to 42 mm with 1\/4\" holes | CM10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer CM10\u003c\/strong\u003e is a universal clamp for tubes and bars from 13 to 42 mm, with a load capacity of up to 20 kg. It offers eight 1\/4\" threaded holes, one 3\/8\" hole, and a cold shoe for mounting action cameras, monitors, and lights, either on its own or with the MA10 articulated arm.\u003c\/p\u003e\n\u003cp\u003eUnlike the \u003ca href=\"\/en\/products\/morsetto-pinza-sfera-1-pollice-outplorer-hm10\"\u003eHM10\u003c\/a\u003e clamp, it does not have a 1\" ball: it is designed for accessories with standard screws. The HM10 is required for the phone clamp.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621581926744,"sku":"OT-CM10","price":27.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-cm10-supporto-a-morsetto-universale.jpg?v=1769711902"},{"product_id":"morsetto-pinza-sfera-1-pollice-outplorer-hm10","title":"Clamp with 1\" ball for 13 to 42 mm tubes | HM10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer HM10\u003c\/strong\u003e is the clamp included in the P100-A kit: it opens and closes with a knob on tubes from 13 to 42 mm and features a 1\" ball for the DA90 arm. It also has a cold shoe and 1\/4\" and 3\/8\" threaded holes for other accessories.\u003c\/p\u003e\n\u003cp\u003eCompared with the \u003ca href=\"\/en\/products\/collare-manubrio-sfera-1-pollice-outplorer-hm25\"\u003eHM25\u003c\/a\u003e collar (22-32 mm), it covers a wider range of diameters and can be moved in seconds; the HM25 is more compact and fixed.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621583139160,"sku":"OT-HM10","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-hm10-supporto-a-morsetto-per-manubrio.jpg?v=1769711907"},{"product_id":"sfera-1-pollice-attacco-specchietto-outplorer-ba25","title":"1\" ball for motorcycle mirror mount | BA25","description":"\u003cp\u003e\u003cstrong\u003eOutplorer BA25\u003c\/strong\u003e is the 1\" ball on an eyelet plate included in the P100-B kit: it locks onto the base of the mirror and turns its mounting point into an attachment for the DA90 arm without taking up handlebar space.\u003c\/p\u003e\n\u003cp\u003eIf you want the complete kit with clamp and arm, choose the \u003ca href=\"\/en\/products\/porta-cellulare-moto-specchietto-outplorer-p100-b\"\u003eP100-B\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621584777560,"sku":"OT-BA25","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-ba25-adattatore-testa-vite-con-sfera-da-1.jpg?v=1769711919"},{"product_id":"collare-manubrio-sfera-1-pollice-outplorer-hm25","title":"Handlebar collar with 1\" ball for 22 to 32 mm | HM25","description":"\u003cp\u003e\u003cstrong\u003eOutplorer HM25\u003c\/strong\u003e is the collar with a 1\" ball included in the P100-C, G100, and H1000 kits: it clamps onto tubular handlebars from 22 to 32 mm, with spacers to adapt it to smaller diameters.\u003c\/p\u003e\n\u003cp\u003eMore compact than the \u003ca href=\"\/en\/products\/morsetto-pinza-sfera-1-pollice-outplorer-hm10\"\u003eHM10\u003c\/a\u003e clamp, but designed for a narrower range of diameters.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621585727832,"sku":"OT-HM25","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-hm25-supporto-manubrio-con-sfera-da-1.jpg?v=1769711925"},{"product_id":"barra-estensione-manubrio-carbonio-outplorer-he10","title":"Outplorer carbon handlebar extension bar | HE10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer HE10\u003c\/strong\u003e is the carbon fiber extension bar included in the H1000 kit: 206 mm long and 22 mm in diameter, it attaches to the handlebars with two aluminum clamps and creates a second bar for mounting a phone, action camera, or lights.\u003c\/p\u003e\n\u003cp\u003eFor the complete kit with clamp, arm, GoPro adapter, and anti-theft knob, choose the \u003ca href=\"\/en\/products\/kit-porta-cellulare-moto-barra-carbonio-outplorer-h1000\"\u003eH1000\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621585858904,"sku":"OT-HE10","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-he10-prolunga-manubrio-in-fibra-di-carbonio.jpg?v=1769711934"},{"product_id":"pomello-antifurto-air-suspension-outplorer-at10","title":"Anti-theft knob for Air Suspension mounts | AT10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer AT10\u003c\/strong\u003e is the anti-theft knob for the Air Suspension series clamps: it replaces the standard screw and opens only with the included dedicated key. Ideal when the motorcycle is parked outdoors for long periods. Aluminum alloy and stainless steel.\u003c\/p\u003e\n\u003cp\u003eIt is included in the \u003ca href=\"\/en\/products\/kit-porta-cellulare-moto-barra-carbonio-outplorer-h1000\"\u003eH1000\u003c\/a\u003e kit; for P100 kits, it must be purchased separately. Not required for Quick Launch mounts.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621586088280,"sku":"OT-AT10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-at10-kit-viti-antifurto-per-supporti.jpg?v=1769711942"},{"product_id":"sfera-1-pollice-perno-m10-outplorer-bm10","title":"1\" ball with M10 threaded stud | BM10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer BM10\u003c\/strong\u003e is a 1\" (25.4 mm) ball with an M10 threaded stud: it screws into an M10 threaded hole and becomes a mount for the DA90 arm and Air Suspension clamp.\u003c\/p\u003e\n\u003cp\u003eThe same ball with other thread sizes: \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m6-outplorer-bm6\"\u003eBM6\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m8-outplorer-bm8\"\u003eBM8\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621586153816,"sku":"OT-BM10","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-bm10-adattatore-sfera-m10.jpg?v=1769711937"},{"product_id":"sfera-1-pollice-perno-m8-outplorer-bm8","title":"1\" ball with M8 threaded stud | BM8","description":"\u003cp\u003e\u003cstrong\u003eOutplorer BM8\u003c\/strong\u003e is a 1\" (25.4 mm) ball with an M8 threaded stud: it screws into an M8 threaded hole and becomes a mount for the DA90 arm and Air Suspension clamp.\u003c\/p\u003e\n\u003cp\u003eThe same ball with other thread sizes: \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m6-outplorer-bm6\"\u003eBM6\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m10-outplorer-bm10\"\u003eBM10\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621586481496,"sku":"OT-BM8","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-bm8-adattatore-sfera-m8.jpg?v=1769711946"},{"product_id":"sfera-1-pollice-perno-m6-outplorer-bm6","title":"1\" ball with M6 threaded stud | BM6","description":"\u003cp\u003e\u003cstrong\u003eOutplorer BM6\u003c\/strong\u003e is a 1\" (25.4 mm) ball with an M6 threaded stud: screw it into an M6 threaded hole and it becomes a mount for the DA90 arm and Air Suspension clamp.\u003c\/p\u003e\n\u003cp\u003eThe same ball with other threads: \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m8-outplorer-bm8\"\u003eBM8\u003c\/a\u003e and \u003ca href=\"\/en\/products\/sfera-1-pollice-perno-m10-outplorer-bm10\"\u003eBM10\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621587267928,"sku":"OT-BM6","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-bm6-adattatore-sfera-m6.jpg?v=1769711954"},{"product_id":"adattatore-gopro-air-suspension-outplorer-gm10","title":"GoPro adapter for Air Suspension mounts | GM10","description":"\u003cp\u003e\u003cstrong\u003eOutplorer GM10\u003c\/strong\u003e is the adapter with a GoPro fork mount for Air Suspension series components: it lets you mount an action camera next to or instead of your phone.\u003c\/p\u003e\n\u003cp\u003eFor the bracket version, which positions the camera below the mount, see the \u003ca href=\"\/en\/products\/staffa-adattatore-gopro-air-suspension-outplorer-gb10\"\u003eGB10\u003c\/a\u003e; for a complete action camera kit, see the \u003ca href=\"\/en\/products\/supporto-action-cam-moto-manubrio-outplorer-g100\"\u003eG100\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all \u003ca href=\"\/en\/collections\/outplorer\"\u003eOutplorer smartphone mounts\u003c\/a\u003e to choose the right attachment.\u003c\/p\u003e","brand":"OUTPLORER","offers":[{"title":"Default Title","offer_id":56621588021592,"sku":"OT-GM10","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/outplorer-gm10-adattatore-di-montaggio-per-gopro.jpg?v=1769711959"}],"url":"https:\/\/endurrad.com\/en\/collections\/navigazione-ed-elettronica-moto.oembed?page=6","provider":"Endurrad®","version":"1.0","type":"link"}