{"title":"Yamaha XMAX 300 Accessories","description":"\u003cp\u003eAccessories and protection for Yamaha XMAX 300: crash bars, footrests, kickstand extensions, luggage racks, and top cases. Always check the scooter’s year and version before ordering.\u003c\/p\u003e","products":[{"product_id":"piastra-cavalletto-yamaha-xmax-300-loboo-cjc862","title":"Kickstand Plate for Yamaha XMAX 300 from 2023 | aluminum base, 304 stainless steel cover, 135 g","description":"\u003cp\u003eThe \u003cstrong\u003eLOBOO CJC862 side stand plate\u003c\/strong\u003e widens the footprint of the \u003cstrong\u003eYamaha XMAX 300 from 2023\u003c\/strong\u003e side stand: when parked, the scooter's weight is distributed over a much larger area instead of the few square centimeters of the stock foot.\u003c\/p\u003e\u003ch2\u003eMixed construction, and not by chance\u003c\/h2\u003e\u003cp\u003eThe base that rests on the ground is made of \u003cstrong\u003ealuminum alloy\u003c\/strong\u003e to keep the weight down. The cover that clamps over the original foot is made of \u003cstrong\u003e304 stainless steel\u003c\/strong\u003e, where mechanical strength and rust resistance are needed. Both parts are CNC-machined, which LOBOO identifies as the reason for the precise finish and hole positioning. Declared total weight: \u003cstrong\u003e135 g\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eanti-slip grooves\u003c\/strong\u003e are machined into the sides and bottom of the base. They address something different from sinking: sideways sliding on wet concrete, gravel, or a painted garage floor.\u003c\/p\u003e\u003ch2\u003eMounts over the original foot\u003c\/h2\u003e\u003cp\u003eThe stock side stand foot does not need to be removed: it remains enclosed between the base and cover, which are tightened with three M5×12 screws. No drilling, no permanent modifications, and if you sell the scooter, you can return it to its original configuration in just a few minutes. LOBOO states that it developed the shape using the vehicle's original data.\u003c\/p\u003e\u003ch2\u003eWhat the manual states\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eContents: base, cover, 3 M5×12 screws, \u003cstrong\u003eTorx T25\u003c\/strong\u003e key, single-dose threadlocker\u003c\/li\u003e\n\u003cli\u003eTightening torque: \u003cstrong\u003e5 N·m\u003c\/strong\u003e for all three screws\u003c\/li\u003e\n\u003cli\u003eDo not fully tighten immediately: make all adjustments first, then perform the final tightening in sequence\u003c\/li\u003e\n\u003cli\u003ePeriodically check the fastening screws\u003c\/li\u003e\n\u003cli\u003eManual included in eight languages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe dimensions are not stated by the manufacturer: the manual only includes a reference ruler from 0 to 8 cm, with a warning that the measurements are taken by hand.\u003c\/p\u003e\u003cp\u003eBe careful not to confuse this code with the \u003cstrong\u003eCHG862\u003c\/strong\u003e, which is the crash bar for the same motorcycle. Find the rest for your XMAX among the \u003ca href=\"\/en\/collections\/accessori-yamaha-xmax-300\"\u003eaccessories for Yamaha XMAX 300\u003c\/a\u003e, and for other models, all the \u003ca href=\"\/en\/collections\/piastra-cavalletto-laterale\"\u003eside stand plates\u003c\/a\u003e.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"Default Title","offer_id":57857772454232,"sku":"CJC862","price":27.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/piastra-cavalletto-loboo-cjc862-yamaha-xmax300-01-vista-alto.jpg?v=1788189939"},{"product_id":"crash-bar-loboo-chg862-yamaha-xmax-300","title":"LOBOO CHG862 Crash Bar for Yamaha XMAX 300 from 2023 | 304 stainless steel, Ø 22 mm, with integrated footrests","description":"\u003cp\u003eThe CHG862 is LOBOO’s crash bar for the Yamaha XMAX 300, made of 304 stainless steel with a Ø 22 mm tube and a 2 mm wall thickness. It does more than just provide protection: it carries four CNC-machined aluminum alloy footrests, two per side, with non-slip rubber inserts that provide a highway-peg riding position on long stretches.\u003c\/p\u003e\u003cp\u003eCheck the year before ordering, because \u003cstrong\u003ethis kit comes in two versions\u003c\/strong\u003e. LOBOO makes one for the 2021–2022 XMAX 300 and one for the XMAX 300 from 2023 onward: the material, tube diameter, and finishes are identical, but the shape of the footrests and the bar routing differ. The one sold here is the \u003cstrong\u003eversion from 2023 onward\u003c\/strong\u003e, the only one covered by the included manual. If your XMAX is a 2021 or 2022 model, the correct kit does exist, but it is not this one: write to us and we will confirm it for you.\u003c\/p\u003e\u003cp\u003eThe package also includes two auxiliary light brackets, one per side, with a Ø 10 mm hole. The lights and wiring are not included and must be purchased separately: they appear in the product photos only to show their position. The kit is available in two finishes, sandblasted and electropolished silver or electrostatic-painted black; the finishes affect appearance only.\u003c\/p\u003e\u003cp\u003eInstallation consists of four steps, identical on both sides, and requires no drilling or modifications to the scooter’s original structure. One point to know before starting: if you decide not to install the light brackets, some components must be installed \u003cem\u003ebefore\u003c\/em\u003e the bar, not afterward. The manual states this explicitly.\u003c\/p\u003e\u003cp\u003eA crash bar reduces damage from a side impact or a stationary fall, but does not eliminate it, and LOBOO does not publish load tests for this part number; therefore, no strength threshold is declared. For cleaning, the manufacturer asks that you keep the pressure washer at least one meter away and use only neutral detergents: acids and alkaline products cause irreversible damage to the surface. Endurrad is a retailer, not the manufacturer.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"Nero","offer_id":57857774551384,"sku":"CHG862BK","price":265.5,"currency_code":"EUR","in_stock":false},{"title":"Silver","offer_id":57857774616920,"sku":"CHG862SL","price":265.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/crash-bar-loboo-chg862-01-argento-tre-quarti-anteriore_9edc2adc-b711-495a-985d-dc64fc265784.jpg?v=1787996479"},{"product_id":"borsa-tunnel-scooter-15l-loboo-btbb15bk","title":"15 L scooter tunnel bag with rain cover, shoulder strap, and MOLLE system — Wanderer","description":"\u003cp\u003eThe space between your legs is the best place to carry a load on a scooter: it stays low, does not raise the center of gravity, and does not catch the wind like a top case. This \u003cstrong\u003e15-liter\u003c\/strong\u003e tunnel bag occupies that space precisely, with a shaped shell that holds its form even when empty thanks to the internal U-shaped support, which can be removed when you need more flexible capacity.\u003c\/p\u003e\u003cp\u003eThe body is made of polyester with EVA and PVC inserts, molded side panels, side pockets with mesh dividers, and reflective inserts on both sides. Outside, there is a \u003cstrong\u003eMOLLE\u003c\/strong\u003e panel for attaching a bottle holder or pouch; inside, there is room for gloves, rain gear, cables, and a few groceries. It comes with a \u003cstrong\u003erain cover\u003c\/strong\u003e and a \u003cstrong\u003edetachable shoulder strap\u003c\/strong\u003e: remove the bag and carry it away without leaving anything on the scooter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBefore ordering, check one thing:\u003c\/strong\u003e you need a scooter with a central tunnel that is \u003cstrong\u003e280–290 mm\u003c\/strong\u003e wide. It is not compatible with flat-floor scooters or step-through motorcycles. The manufacturer has verified the Honda ADV 150 and ADV 350, Yamaha XMAX 300, BMW C 400 GT and C 400 X, and Zontes 350D and 350E; the technical panels also show the Honda Forza 350 (NSS350) and Zontes 368G. If your scooter is not listed, measure the tunnel: that is the measurement that determines compatibility.\u003c\/p\u003e","brand":"LOBOO","offers":[{"title":"Default Title","offer_id":58421043724632,"sku":"BTBB15BK","price":54.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/6561\/0991\/files\/borsa-tunnel-scooter-15l-loboo-btbb15bk-01-vista-frontale.jpg?v=1788852120"}],"url":"https:\/\/endurrad.com\/en\/collections\/accessori-yamaha-xmax-300.oembed","provider":"Endurrad®","version":"1.0","type":"link"}